Asociación Centro Tecnológico Ceit (CEIT)

2026

1. Analysis of Cellulose and Copper Contamination Effects on the Dielectric and Physicochemical Properties of Natural Ester Oil Under Thermal Aging

   IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 33, Núm. 2, pp. 1289-1297

2. Beyond synthetic lethality in large-scale metabolic and regulatory network models via genetic minimal intervention set

   Bioinformatics Advances, Vol. 6, Núm. 1

3. Comparative analysis of harmonic drive and planetary gear actuation units for exoskeletons using load cell-based transparency control

   Mechatronics, Vol. 116

4. Creep behavior and strengthening mechanism of chemically modified heat-resistant austenitic GX40CrNiSi25-20 type steels

   Materials Science and Engineering: A, Vol. 950

5. Deep Learning Approaches for Effective Fog Detection

   IET Intelligent Transport Systems, Vol. 20, Núm. 1

6. Defects, Microstructure, and Hardness of As-Built and Heat-Treated 13 Hot Work Tool Steel and 17-4 PH Stainless Steel Obtained by Fused Filament Fabrication

   Journal of Manufacturing and Materials Processing, Vol. 10, Núm. 3

7. Desarrollo y validación de algoritmos de técnicas imaging para materiales anisotrópicos

   Revista DYNA, Vol. 101, Núm. 2, pp. 171-175

8. Effect of hot isostatic pressing quenching and post-hot isostatic pressing heat treatments on the microstructure and properties of a high-temperature Ni-based superalloy

   Powder Metallurgy

9. Effect of powder characteristics on shrinkage kinetics of WC-Co-Cr Zn-reclaimed submicron powders

   International Journal of Refractory Metals and Hard Materials, Vol. 136

10. Engineering the wetting response of chromium thin films via femtosecond laser nanostructuring and environmental conditioning

    Results in Surfaces and Interfaces, Vol. 23

11. Enhanced mechanical and corrosion properties of super duplex stainless steel obtained by powder metallurgy host isostatic pressing (PM-HIP)

    Powder Metallurgy

12. Evaluating Shared Control in Real-World Conditions

    IEEE Open Journal of Vehicular Technology, Vol. 7, pp. 418-431

13. Evaluation of mechanical and magnetic properties of laser-DED Fe–Si alloy: element segregation and low-frequency AC performance

    Journal of Materials Research and Technology, Vol. 41, pp. 4645-4655

14. Foreign object detection using neural radiance field as comparative baseline

    Visual Computer, Vol. 42, Núm. 4

15. Heuristic Singularity Avoidance Strategy for Real-Time Robot Trajectory Planning With Constrained Motion by a Passive Kinematic Chain

    IEEE Transactions on Medical Robotics and Bionics, Vol. 8, Núm. 1, pp. 304-322

16. Influence of Mo and Ni Alloying on Recrystallization Kinetics and Phase Transformation in Quenched and Tempered Thick Steel Plates

    Materials, Vol. 19, Núm. 2

17. Manufacturing and Subsystem Validation of an HTS Electric Motor for Single-Aisle Regional Aircraft Propulsion

    IEEE Access, Vol. 14, pp. 9340-9347

18. Mechanical properties of heat treatable TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 136

19. Minimization of Porosity in E11018-G Low-Alloyed Steel Processed by Laser Powder Directed Energy Deposition

    Steel Research International, Vol. 97, Núm. 3, pp. 1369-1383

20. Monocular RGB 6D object pose estimation for augmented reality: a survey

    Virtual Reality, Vol. 30, Núm. 2