Artículos (1.205)

¹ Publicaciones consideradas como producción de la unidad.

Ver datos de investigación referenciados.

filter_list Tipo (agr.) Artículos

2026

  1. Creep behavior and strengthening mechanism of chemically modified heat-resistant austenitic GX40CrNiSi25-20 type steels

    Materials Science and Engineering: A, Vol. 950

  2. Effect of powder characteristics on shrinkage kinetics of WC-Co-Cr Zn-reclaimed submicron powders

    International Journal of Refractory Metals and Hard Materials, Vol. 136

  3. Mechanical properties of heat treatable TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 136

  4. Thermodynamic evaluation via CALPHAD and experimental investigation of WC-based multicomponent metallic alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 136

2025

  1. A Cooperative Driving Framework for Platooning Using V2X Messages in Urban Environments

    IEEE Transactions on Vehicular Technology, Vol. 74, Núm. 11, pp. 16813-16826

  2. A systematic review of acceleration-based estimation of railway track quality

    Vehicle System Dynamics

  3. Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra-Heavy Gage

    Steel Research International

  4. Assessing the impact of Modbus/TCP protocol attacks on critical infrastructure: WWTP case study

    Computers and Electrical Engineering, Vol. 126

  5. Cheese whey fermentation for selective VFA production: Operational parameters assessment and scale-up

    Journal of Environmental Chemical Engineering, Vol. 13, Núm. 3

  6. Coating Thickness Estimation Using a CNN-Enhanced Ultrasound Echo-Based Deconvolution

    Sensors, Vol. 25, Núm. 19

  7. Correlation between microstructure and erosion-corrosion behavior of a nickel-aluminum bronze produced by continuous casting and powder metallurgy

    Journal of Materials Research and Technology, Vol. 36, pp. 3818-3830

  8. Cost-Effective FEM Simulation Through Solid Bodies of the Thermal Behavior of Lattice Structures Printed via PBF-LB

    Applied Sciences (Switzerland), Vol. 15, Núm. 3

  9. DQ-Current Observer for Aiding the Control of Multiple Active Bridge Converters

    IEEE Open Journal of Power Electronics, Vol. 6, pp. 1685-1702

  10. Design and additive manufacturing of a lightweight aerospace electric actuator

    Open Research Europe, Vol. 4

  11. Design and showcase of a stairs-based testbed for the benchmark of exoskeleton devices: The STEPbySTEP project

    WEARABLE TECHNOLOGIES, Vol. 6

  12. DriWM®: A comprehensive Drinking Water Modelling framework for integral simulation of drinking water treatment plants

    Journal of Water Process Engineering, Vol. 76

  13. Effect of Chromium on sliding wear behavior and strain hardening behavior of Fe22Mn0.6C-xCr TWIP steel

    Journal of Materials Research and Technology, Vol. 36, pp. 6088-6098

  14. Effect of Post-HIP Heat Treatments on the Microstructural Evolution of High Temperature Ni-based Superalloy

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1249-S1254

  15. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

    International Journal of Refractory Metals and Hard Materials, Vol. 130

  16. Effect of the cooling rate on mechanical properties and microstructure of a co-precipitated Fe/Cu prealloyed powder

    Journal of Alloys and Compounds, Vol. 1042