Publicacions (22) Publicacions en què ha participat algun/a investigador/a

2006

  1. ADM1-based methodology for the characterisation of the influent sludge in anaerobic reactors

    Water Science and Technology, Vol. 54, Núm. 4, pp. 157-166

  2. An approach to simplify the design of IFFT/FFT cores for OFDM systems

    IEEE Transactions on Consumer Electronics, Vol. 52, Núm. 1, pp. 26-32

  3. Atomistic simulation of tensile strength and toughness of cracked Cu nanowires

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622

  4. BaTiO3-CuO sputtered thin film for carbon dioxide detection

    Sensors and Actuators, B: Chemical, Vol. 118, Núm. 1-2, pp. 305-310

  5. Controlled undercooling of liquid iron in contact with Al 2O 3 Substrates under varying oxygen partial pressures

    Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Vol. 37, Núm. 5, pp. 811-821

  6. Densification behavior of tungsten heavy alloy based on master sintering curve concept

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 9, pp. 2837-2848

  7. Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium

    Acta Materialia, Vol. 54, Núm. 13, pp. 3445-3452

  8. Deterministic model for ice cream solidification

    Computational Materials Science, Vol. 38, Núm. 1, pp. 9-21

  9. Evaluation of on-line analytic and numeric inverse kinematics approaches driven by partial vision input

    Virtual Reality, Vol. 10, Núm. 1, pp. 48-61

  10. Extent of plasma damage to porous organosilicate films characterized with nanoindentation, x-ray reflectivity, and surface acoustic waves

    Journal of Materials Research, Vol. 21, Núm. 12, pp. 3161-3167

  11. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Acta Materialia, Vol. 54, Núm. 13, pp. 3453-3462

  12. Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 11, pp. 3337-3346

  13. Influence of multisensory feedback on haptic accessibility tasks

    Virtual Reality, Vol. 10, Núm. 1, pp. 31-40

  14. Integración de los simuladores de operación en la explotación de EDAR: aplicación a un caso práctico, la EDAR de Calasparra

    Tecnología del agua, Año 26, Núm. 272, pp. 70-80

  15. Massa and charge conservation check in dynamic models: Application to the new ADM1 model

    Water Science and Technology, Vol. 53, Núm. 1, pp. 225-240

  16. Mathematical modelling of the anaerobic hybrid reactor

    Water Science and Technology, Vol. 54, Núm. 2, pp. 63-71

  17. SU8 protective layers in liquid operating SAWs

    Sensors and Actuators, B: Chemical, Vol. 118, Núm. 1-2, pp. 374-379

  18. Supervisory control strategies for the new WWTP of Galindo-Bilbao: The long run from the conceptual design to the full-scale experimental validation

    Water Science and Technology, Vol. 53, Núm. 4-5, pp. 193-201

  19. Synthesis and biological evaluation of heteroaryldiamides and heteroaryldiamines as cytotoxic agents, apoptosis inducers and caspase-3 activators

    Archiv der Pharmazie, Vol. 339, Núm. 4, pp. 182-192

  20. Thermal behavior of freestanding microstructures fabricated by silicon frontside processing using porous silicon as sacrificial layer

    IEEE Sensors Journal, Vol. 6, Núm. 3, pp. 548-556