Asociación Centro Tecnológico Ceit (CEIT)

2025

1. A systematic review of acceleration-based estimation of railway track quality

   Vehicle System Dynamics

2. Cheese whey fermentation for selective VFA production: Operational parameters assessment and scale-up

   Journal of Environmental Chemical Engineering, Vol. 13, Núm. 3

3. Cost-Effective FEM Simulation Through Solid Bodies of the Thermal Behavior of Lattice Structures Printed via PBF-LB

   Applied Sciences (Switzerland), Vol. 15, Núm. 3

4. Design and additive manufacturing of a lightweight aerospace electric actuator

   Open Research Europe, Vol. 4

5. Design and showcase of a stairs-based testbed for the benchmark of exoskeleton devices: The STEPbySTEP project

   WEARABLE TECHNOLOGIES, Vol. 6

6. Effect of Post-HIP Heat Treatments on the Microstructural Evolution of High Temperature Ni-based Superalloy

   Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1249-S1254

7. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

   International Journal of Refractory Metals and Hard Materials, Vol. 130

8. Enhanced Standard Operating Procedures for 31P NMR-Based Metabolomics in Tissue Extracts

   JACS Au, Vol. 5, Núm. 5, pp. 2285-2293

9. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

   Optics and Laser Technology, Vol. 180

10. Experimental study and numerical modelling on multi-pulse laser ablation of aluminium with femtosecond laser

    Optics and Laser Technology, Vol. 184

11. Femto-Laser Processed Metasurface With Fano Response: Applications to a High Performance Refractometric Sensor

    Photonic Sensors, Vol. 15, Núm. 2

12. Haptic Icons: A Hands-On Approach to Haptic HMI in Automated Vehicles

    IEEE Open Journal of Intelligent Transportation Systems, Vol. 6, pp. 673-691

13. Influence of Astroloy gas-atomized powder particle size on powder properties and HIPped impact toughness

    Journal of Alloys and Compounds, Vol. 1025

14. Integration of manufacturing constraints into topology optimization algorithms for long fibre reinforced plastic components

    International Journal of Advanced Manufacturing Technology

15. Interaction mechanism of radial collinear cracks on a high-speed train brake disc

    Engineering Failure Analysis, Vol. 168

16. Microstructural Analysis of Multi-Phase Coated Hot Stamped Steel Using Magnetic Barkhausen Noise

    Journal of Nondestructive Evaluation, Vol. 44, Núm. 2

17. Nickel Aluminium Bronze Alloys With Enhanced Erosion-Corrosion Resistance And Mechanical Strength

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S819-S826

18. Optimising the laser powder bed fusion processing parameters of Cu-Al-Ni shape memory alloys: microstructure and functional properties relationship

    Virtual and Physical Prototyping, Vol. 20, Núm. 1

19. Output Current Ripple in Electric Vehicles With Asymmetrical Dual Three-Phase Arrangement Applying Interleaved Carrier-Based PWM Techniques

    IEEE Access, Vol. 13, pp. 41743-41767

20. Phosphorus recovery using low-grade magnesium oxide as a magnesium source and an alkaline reagent: A pilot-scale study

    Journal of Water Process Engineering, Vol. 72