Asociación Centro Tecnológico Ceit (CEIT)

2025

1. A Cooperative Driving Framework For Platooning Using V2X Messages In Urban Environments

   IEEE Transactions on Vehicular Technology

2. A systematic review of acceleration-based estimation of railway track quality

   Vehicle System Dynamics

3. Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra-Heavy Gage

   Steel Research International

4. Assessing the impact of Modbus/TCP protocol attacks on critical infrastructure: WWTP case study

   Computers and Electrical Engineering, Vol. 126

5. Cheese whey fermentation for selective VFA production: Operational parameters assessment and scale-up

   Journal of Environmental Chemical Engineering, Vol. 13, Núm. 3

6. Coating Thickness Estimation Using a CNN-Enhanced Ultrasound Echo-Based Deconvolution

   Sensors, Vol. 25, Núm. 19

7. Cost-Effective FEM Simulation Through Solid Bodies of the Thermal Behavior of Lattice Structures Printed via PBF-LB

   Applied Sciences (Switzerland), Vol. 15, Núm. 3

8. DQ-Current Observer for Aiding the Control of Multiple Active Bridge Converters

   IEEE Open Journal of Power Electronics, Vol. 6, pp. 1685-1702

9. Design and additive manufacturing of a lightweight aerospace electric actuator

   Open Research Europe, Vol. 4

10. Design and showcase of a stairs-based testbed for the benchmark of exoskeleton devices: The STEPbySTEP project

    WEARABLE TECHNOLOGIES, Vol. 6

11. DriWM®: A comprehensive Drinking Water Modelling framework for integral simulation of drinking water treatment plants

    Journal of Water Process Engineering, Vol. 76

12. Effect of Post-HIP Heat Treatments on the Microstructural Evolution of High Temperature Ni-based Superalloy

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1249-S1254

13. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

    International Journal of Refractory Metals and Hard Materials, Vol. 130

14. Effect of the cooling rate on mechanical properties and microstructure of a co-precipitated Fe/Cu prealloyed powder

    Journal of Alloys and Compounds, Vol. 1042

15. Enhanced Standard Operating Procedures for 31P NMR-Based Metabolomics in Tissue Extracts

    JACS Au, Vol. 5, Núm. 5, pp. 2285-2293

16. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

    Optics and Laser Technology, Vol. 180

17. Experimental study and numerical modelling on multi-pulse laser ablation of aluminium with femtosecond laser

    Optics and Laser Technology, Vol. 184

18. Fault Tolerance and Fallback Strategies in Connected and Automated Vehicles: A Review

    IEEE Open Journal of Intelligent Transportation Systems, Vol. 6, pp. 915-937

19. Femto-Laser Processed Metasurface With Fano Response: Applications to a High Performance Refractometric Sensor

    Photonic Sensors, Vol. 15, Núm. 2

20. Haptic Icons: A Hands-On Approach to Haptic HMI in Automated Vehicles

    IEEE Open Journal of Intelligent Transportation Systems, Vol. 6, pp. 673-691