Publicacións (47) Publicacións nas que participase algún/ha investigador/a

2014

  1. "in-situ" mechanical characterisation of WC-Co hardmetals using microbeam testing

    International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 236-240

  2. A Brain Surgery Simulator

    IEEE Computer Graphics and Applications, Vol. 34, Núm. 3, pp. 12-18

  3. A comparison between optimization-based human motion prediction methods: Data-based, knowledge-based and hybrid approaches

    Structural and Multidisciplinary Optimization, Vol. 49, Núm. 1, pp. 169-183

  4. A haptic pedal for surgery assistance

    Computer Methods and Programs in Biomedicine, Vol. 116, Núm. 2, pp. 97-104

  5. A hybrid dynamic motion prediction method for multibody digital human models based on a motion database and motion knowledge

    Multibody System Dynamics, Vol. 32, Núm. 1, pp. 27-53

  6. A novel approach to diagnosing motor skills

    IEEE Transactions on Learning Technologies, Vol. 7, Núm. 4, pp. 304-318

  7. An area-efficient Radix 28 FFT algorithm for DVB-T2 receivers

    Microelectronics Journal, Vol. 45, Núm. 10, pp. 1311-1318

  8. An automatic tool to facilitate the statistical group analysis of DTI

    Computers in Biology and Medicine, Vol. 53, pp. 76-84

  9. Analysis of the effect of al on the static softening kinetics of C-Mn steels using a physically based model

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 45, Núm. 2, pp. 934-947

  10. Application of agent based simulation for evaluating a bus layout design from passengers' perspective

    Transportation Research Part C: Emerging Technologies, Vol. 43, pp. 222-229

  11. Cell-Free layer (CFL) measurements in complex geometries: Contractions and bifurcations

    Lecture Notes in Computational Vision and Biomechanics, Vol. 12, pp. 119-132

  12. Characterization of CVD bonded tyranno® fibers oxidized at high temperatures

    Journal of the American Ceramic Society, Vol. 97, Núm. 12, pp. 3958-3966

  13. Comparison of real time impedance monitoring of bacterial biofilm cultures in different experimental setups mimicking real field environments

    Sensors and Actuators, B: Chemical, Vol. 195, pp. 667-676

  14. Constrained layer damper modelling and performance evaluation for eliminating squeal noise in trams

    Shock and Vibration, Vol. 2014

  15. Development of a Biological Protocol for Endotoxin Detection Using Quartz Crystal Microbalance (QCM)

    Applied Biochemistry and Biotechnology, Vol. 174, Núm. 7, pp. 2492-2503

  16. Distortion correction and calibration of intra-operative spine X-ray images using a constrained DLT algorithm

    Computerized Medical Imaging and Graphics, Vol. 38, Núm. 7, pp. 558-568

  17. Effect of Silicon Addition on Microstructure and Mechanical Properties of Chromium and Titanium Based Coatings

    Revista Facultad de Ingeniería, Vol. 23, Núm. 37, pp. 9-21

  18. Effect of the Cr content on the sintering behaviour of TiCN-WC-Ni-Cr 3C2 powder mixtures

    International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 125-131

  19. Estimación del potencial de ahorro en los sistemas de aireación de las EDAR mediante la medición de la transferencia de oxígeno

    Tecnoaqua, Núm. 9, pp. 64-72

  20. Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

    Transportation Research Part C: Emerging Technologies, Vol. 38, pp. 16-27