Publikationen (65) Publikationen, an denen Forscher/innen teilgenommen haben

2018

  1. 67-90 GHz broadband power detector with 3 GHz output bandwidth for on-chip test of millimeter-wave circuits

    International Journal of Circuit Theory and Applications, Vol. 46, Núm. 3, pp. 366-374

  2. A comparison of the structure and mechanical properties of commercially pure tungsten rolled plates for the target of the European spallation source

    International Journal of Refractory Metals and Hard Materials, Vol. 70, pp. 45-55

  3. A review on the demineralisation of pre- and post-pyrolysis biomass and tyre wastes

    Waste Management, Vol. 79, pp. 667-688

  4. A universally applicable multiaxial fatigue criterion in 2D cyclic loading

    International Journal of Fatigue, Vol. 110, pp. 95-104

  5. AZO Embedded Interdigitated Electrodes for Monitoring Stimuli Responsive Materials

    Advanced Functional Materials, Vol. 28, Núm. 48

  6. Aceros avanzados de alta resistencia con matriz bainítica: evolución de la microestructura y la nanodureza durante tratamientos de austempering

    Trater Press: revista del tratamiento térmico, Núm. 67, pp. 30-38

  7. An Ensemble of Component-Based and Population-Based Self-Organizing Maps for the Identification of the Degradation State of Insulated-Gate Bipolar Transistors

    IEEE Transactions on Reliability, Vol. 67, Núm. 3, pp. 1304-1313

  8. Analysis of YouTube’s traffic adaptation to dynamic environments

    Multimedia Tools and Applications, Vol. 77, Núm. 7, pp. 7977-8000

  9. Analysis of temperature and pH shifts on the impedance characteristic using interdigitated microelectrode based sensors for industrial applications

    Sensors and Actuators, A: Physical, Vol. 277, pp. 1-7

  10. Antibody biosensors for spoilage yeast detection based on impedance spectroscopy

    Biosensors and Bioelectronics, Vol. 102, pp. 432-438

  11. Beverage spoilage yeast detection methods and control technologies: A review of Brettanomyces

    International Journal of Food Microbiology, Vol. 283, pp. 65-76

  12. Brettanomyces bruxellensis growth detection using interdigitated microelectrode based sensors by means of impedance analysis

    Sensors and Actuators, A: Physical, Vol. 269, pp. 175-181

  13. Characterization of austenite microstructure from quenched martensite using conventional metallographic techniques and a crystallographic reconstruction procedure

    Metals, Vol. 8, Núm. 5

  14. Comparison of the thermal shock resistance of WC based cemented carbides with Co and Co-Ni-Cr based binders

    International Journal of Refractory Metals and Hard Materials, Vol. 72, pp. 89-96

  15. Controlling two haptically-coupled devices: System modeling and stability analysis

    Mechatronics, Vol. 49, pp. 224-234

  16. Cybersecurity-The Forgotten Issue in Railways: Security Can Be Woven into Safety Designs

    IEEE Vehicular Technology Magazine, Vol. 13, Núm. 1, pp. 48-55

  17. Development of a robotic device for post-stroke home tele-rehabilitation

    Advances in Mechanical Engineering, Vol. 10, Núm. 1

  18. Development, Characterization, and Testing of a SiC-Based Material for Flow Channel Inserts in High-Temperature DCLL Blankets

    IEEE Transactions on Plasma Science, Vol. 46, Núm. 5, pp. 1561-1569

  19. Effect of microstructure on post-rolling induction treatment in a low C Ti-Mo microalloyed steel

    Metals, Vol. 8, Núm. 9

  20. Elucidating the role of the ionic liquid in the actuation behavior of thermo-responsive ionogels

    Sensors and Actuators, B: Chemical, Vol. 260, pp. 380-387