Articles (25)

¹ Publications considered as the unit’s output.

View referenced research data.

in the year 1993 Remove filter
filter_list Type (aggr.) Articles from 1993 to 1993

1993

  1. A new electronic switch controlled by an infrared sensor

    Sensors and Actuators: A. Physical, Vol. 37-38, Núm. C, pp. 627-632

  2. A simple and highly parallelizable method for real-time dynamic simulation based on velocity transformations

    Computer Methods in Applied Mechanics and Engineering, Vol. 107, Núm. 3, pp. 313-339

  3. A transducer for the measurement of forces in external fracture fixator devices: Test results

    Sensors and Actuators: A. Physical, Vol. 37-38, Núm. C, pp. 301-306

  4. An optimized preparation process of stainless-steel substrates and their application to thin-film high pressure sensors

    Sensors and Actuators: A. Physical, Vol. 37-38, Núm. C, pp. 703-707

  5. Application of J-integral to low-cycle fatigue of 316L stainless steel at 600-625°C

    International Journal of Fracture, Vol. 64, Núm. 2

  6. Dislocation Loops in a‐Silicon Nitride

    Journal of the American Ceramic Society, Vol. 76, Núm. 8, pp. 2136-2138

  7. Dynamics of B sublimation from boron doped graphite USB15

    Nuclear Inst. and Methods in Physics Research, B, Vol. 80-81, Núm. PART 2, pp. 1468-1471

  8. Edge physics and H-mode studies in ASDEX Upgrade

    Plasma Physics and Controlled Fusion, Vol. 35, Núm. SB

  9. How a stable crack extension changes the Weibull modulus of cleavage fracture probability

    International Journal of Fracture, Vol. 62, Núm. 2

  10. Improvement of fracture toughness of forging steels microalloyed with titanium by accelerated cooling after hot working

    Scripta Metallurgica et Materiala, Vol. 29, Núm. 9, pp. 1217-1222

  11. Influence of Oxygen Partial Pressure on the Quasi‐Ternary System Cr─Mn─Ti Oxide

    Journal of the American Ceramic Society, Vol. 76, Núm. 11, pp. 2869-2878

  12. Influence of the microstructure on the fracture toughness and fracture mechanisms of forging steels microalloyed with titanium with ferrite-pearlite structures

    Scripta Metallurgica et Materiala, Vol. 29, Núm. 4, pp. 451-456

  13. Interface microstructures in diffusion bonding of titanium alloys to stainless and low alloy steels

    Materials Science and Technology (United Kingdom), Vol. 9, Núm. 8, pp. 633-641

  14. LOW-CYCLE FATIGUE AND CREEP-FATIGUE BEHAVIOR OF A 316-L STAINLESS-STEEL

    ZEITSCHRIFT FUR METALLKUNDE, Vol. 84, Núm. 10, pp. 708-715

  15. Mechanical and electrical properties Of SiO2 thin films r.f. sputtered on non-silicon substrates for mechanical sensors

    Sensors and Actuators: A. Physical, Vol. 37-38, Núm. C, pp. 57-60

  16. Patterns in heavily deformed metals

    Physica Scripta, Vol. 1993, Núm. T49B, pp. 405-411

  17. Physical analysis of electromigration damage under non-d.c. conditions

    Microelectronics Reliability, Vol. 33, Núm. 8, pp. 1189-1198

  18. Quantum well lasers with InAs monolayers in the active region grown at low temperature by atomic layer molecular beam epitaxy

    Journal of Crystal Growth, Vol. 127, Núm. 1-4, pp. 46-49

  19. Resolution of the Hall-Petch equation and comparison with the experimental results of three vanadium-titanium microalloyed steels

    Journal of Materials Science, Vol. 28, Núm. 23, pp. 6450-6456

  20. Singular character of axisymmetric stresses around wedge-shaped notches in cylindrical bodies under torsion: unit step load

    Theoretical and Applied Fracture Mechanics, Vol. 18, Núm. 3, pp. 247-257