Articles (33)

¹ Publications considered as the unit’s output.

View referenced research data.

in the year 2006 Remove filter
filter_list Type (aggr.) Articles from 2006 to 2006

2006

  1. A local active noise control system based on a virtual-microphone technique for railway sleeping vehicle applications

    Mechanical Systems and Signal Processing, Vol. 20, Núm. 8, pp. 2259-2276

  2. A method to optimize the bandwidth of uwb planar monopole antennas

    Microwave and Optical Technology Letters, Vol. 48, Núm. 1, pp. 155-159

  3. A simplified methodology to predict the dynamic stiffness of carbon-black filled rubber isolators using a finite element code

    Journal of Sound and Vibration, Vol. 296, Núm. 4-5, pp. 757-776

  4. ADM1-based methodology for the characterisation of the influent sludge in anaerobic reactors

    Water Science and Technology, Vol. 54, Núm. 4, pp. 157-166

  5. Advances on railway yaw damper characterisation exposed to small displacements

    International Journal of Heavy Vehicle Systems, Vol. 13, Núm. 4, pp. 263-280

  6. An approach to simplify the design of IFFT/FFT cores for OFDM systems

    IEEE Transactions on Consumer Electronics, Vol. 52, Núm. 1, pp. 26-32

  7. Atomistic simulation of tensile strength and toughness of cracked Cu nanowires

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622

  8. BaTiO3-CuO sputtered thin film for carbon dioxide detection

    Sensors and Actuators, B: Chemical, Vol. 118, Núm. 1-2, pp. 305-310

  9. Cefaleas

    Actualización en Medicina de Familia: AMF, Vol. 2, Núm. 5, pp. 249-259

  10. Colour and proportion of grains measurement in through-body porcelain tiles by means of image processing

    Journal of the European Ceramic Society, Vol. 26, Núm. 15, pp. 3373-3381

  11. Controlled undercooling of liquid iron in contact with Al 2O 3 Substrates under varying oxygen partial pressures

    Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Vol. 37, Núm. 5, pp. 811-821

  12. Densification behavior of tungsten heavy alloy based on master sintering curve concept

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 9, pp. 2837-2848

  13. Design of UWB folded-plate monopole antennas based on TLM

    IEEE Transactions on Antennas and Propagation, Vol. 54, Núm. 6, pp. 1676-1687

  14. Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium

    Acta Materialia, Vol. 54, Núm. 13, pp. 3445-3452

  15. Deterministic model for ice cream solidification

    Computational Materials Science, Vol. 38, Núm. 1, pp. 9-21

  16. Evaluation of on-line analytic and numeric inverse kinematics approaches driven by partial vision input

    Virtual Reality, Vol. 10, Núm. 1, pp. 48-61

  17. Extent of plasma damage to porous organosilicate films characterized with nanoindentation, x-ray reflectivity, and surface acoustic waves

    Journal of Materials Research, Vol. 21, Núm. 12, pp. 3161-3167

  18. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Acta Materialia, Vol. 54, Núm. 13, pp. 3453-3462

  19. GARBAN II: an integrative framework for extracting biological information from proteomic and genomic data.

    Proteomics, Vol. 6 Suppl 1

  20. Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 11, pp. 3337-3346