Asociación Centro Tecnológico Ceit (CEIT)

2009

1. A comparative analysis of different approaches for integrated WWTP modelling

   Water Science and Technology, Vol. 59, Núm. 1, pp. 141-147

2. A dual front-end for the new GPS/GALILEO generation in a 0.35 μm SiGe process

   Integration, the VLSI Journal, Vol. 42, Núm. 3, pp. 321-331

3. A fully integrated 23.2 dBm P1 dB CMOS power amplifier for the IEEE 802.11a with 29% PAE

   Integration, the VLSI Journal, Vol. 42, Núm. 1, pp. 77-82

4. A head-neck biomechanical model of a 6-year-old child for frontal crash studies

   International Journal of Vehicle Safety, Vol. 4, Núm. 4, pp. 257-270

5. A new autonomous agent approach for the simulation of pedestrians in urban environments

   Integrated Computer-Aided Engineering, Vol. 16, Núm. 4, pp. 283-297

6. A novel QoS architecture for multi-service provisioning in multi-residential gateways

   IEEE Transactions on Consumer Electronics, Vol. 55, Núm. 2, pp. 477-485

7. Automatic extraction of the topology of 3D electrical mock-ups using a mixed octree-voxel method

   Advances in Engineering Software, Vol. 40, Núm. 8, pp. 570-582

8. Conoscopic holograms analysis using variations of the hough transform

   International Journal of Imaging Systems and Technology, Vol. 19, Núm. 1, pp. 10-13

9. Control de Velocidad basado en Lógica Borrosa para Entornos Urbanos Congestionados

   Revista iberoamericana de automática e informática industrial ( RIAI ), Vol. 6, Núm. 4, pp. 61-68

10. Determination of residual stresses in cathodic arc coatings by means of the parallel beam glancing X-ray diffraction technique

    Thin Solid Films, Vol. 518, Núm. 1, pp. 206-212

11. Direct observation of the effects of alloying additions on transformation mechanisms in emerging steel alloys with In-Situ TEM

    Microscopy and Microanalysis, Vol. 15, Núm. SUPPL. 2, pp. 704-705

12. EBSD characterization of a hot worked 304 austenitic stainless steel under strain reversal

    Journal of Microscopy, Vol. 235, Núm. 1, pp. 36-49

13. Effect of Ni powder characteristics on the consolidation of ultrafine TiMoCN cermets by means of SPS and HIP technologies

    Materials Science and Engineering A, Vol. 500, Núm. 1-2, pp. 225-232

14. Effect of presintering treatments on TiMoCN-Ni based cermets processed from different powder mixtures

    International Journal of Refractory Metals and Hard Materials, Vol. 27, Núm. 1, pp. 164-172

15. Effect of the heat treatment prior to extrusion on the direct hot-extrusion of aluminium powder compacts

    Journal of Alloys and Compounds, Vol. 467, Núm. 1-2, pp. 191-201

16. Electrochemical deposition of ZnO in a room temperature ionic liquid: 1-Butyl-1-methylpyrrolidinium bis(trifluoromethane sulfonyl)imide

    Electrochemistry Communications, Vol. 11, Núm. 11, pp. 2184-2186

17. Fracture toughness of an α-Al2O3 ceramic for joint prostheses under sinter and sinter-HIP conditions

    International Journal of Refractory Metals and Hard Materials, Vol. 27, Núm. 4, pp. 722-728

18. Haptic wrists: An alternative design strategy based on user perception

    Journal of Computing and Information Science in Engineering, Vol. 9, Núm. 1, pp. 1-3

19. High-power laser interference lithography process on photoresist: Effect of laser fluence and polarisation

    Applied Surface Science, Vol. 255, Núm. 10, pp. 5537-5541

20. Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressureless sintered at different temperatures: Improvement in mechanical properties for use in total hip arthroplasty (THA)

    International Journal of Refractory Metals and Hard Materials, Vol. 27, Núm. 5, pp. 900-906