Asociación Centro Tecnológico Ceit (CEIT)

2012

1. 30kw DC-DC converters with regenerative mode for electric cars

   Journal of Power Electronics, Vol. 12, Núm. 2, pp. 233-241

2. A comparison of crosswind calculations using a full vehicle and a simplified 2D model

   Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Vol. 226, Núm. 3, pp. 305-317

3. A fuzzy aid rear-end collision warning/avoidance system

   Expert Systems with Applications, Vol. 39, Núm. 10, pp. 9097-9107

4. A methodology for optimal voxel size computation in collision detection algorithms for virtual reality

   Virtual Reality, Vol. 16, Núm. 3, pp. 205-213

5. A new marker design for a robust marker tracking system against occlusions

   Computer Animation and Virtual Worlds, Vol. 23, Núm. 5, pp. 503-518

6. Advanced data management for optimising the operation of a full-scale WWTP

   Water Science and Technology, Vol. 66, Núm. 2, pp. 314-320

7. An evolutionary tuned driving system for virtual car racing games: The AUTOPIA driver

   International Journal of Intelligent Systems, Vol. 27, Núm. 3, pp. 217-241

8. An intelligent V2I-based traffic management system

   IEEE Transactions on Intelligent Transportation Systems, Vol. 13, Núm. 1, pp. 49-58

9. Assessment of elastic anisotropy and incipient plasticity in Fe 3C by nanoindentation

   Journal of Materials Research, Vol. 27, Núm. 1, pp. 45-52

10. Carbide spheroidization kinetics in a low-alloy, medium-carbon steel: Relevance of deformation after transformation

    Iron and Steel Technology, Vol. 9, Núm. 10, pp. 122-128

11. Comparison of the friction and wear behaviour of WC-Ni-Co-Cr and WC-Co hardmetals in contact with steel at high temperatures

    Wear, Vol. 280-281, pp. 15-21

12. Cubical mass-spring model design based on a tensile deformation test and nonlinear material model

    IEEE Transactions on Visualization and Computer Graphics, Vol. 18, Núm. 2, pp. 228-241

13. DRIBON: A mechatronic bone drilling tool

    Mechatronics, Vol. 22, Núm. 8, pp. 1060-1066

14. Dry anaerobic digestion of agro-food waste in a batch system

    Journal of Residuals Science and Technology, Vol. 9, Núm. 1, pp. 1-7

15. Energy harvesting technologies for low-power electronics

    Transactions on emerging telecommunications technologies, Vol. 23, Núm. 8, pp. 728-741

16. Evolution of the magnetic properties of co10cu90 nanoparticles prepared by wet chemistry with thermal annealing

    Journal of Nanoscience and Nanotechnology, Vol. 12, Núm. 9, pp. 7529-7534

17. Experimental results of air target detection with a GPS forward-scattering radar

    IEEE Geoscience and Remote Sensing Letters, Vol. 9, Núm. 1, pp. 47-51

18. Fabrication of high quality sub-micron Au gratings over large areas with pulsed laser interference lithography for SPR sensors

    Optical Materials Express, Vol. 2, Núm. 11, pp. 1571-1579

19. Genetic fuzzy-based steering wheel controller using a mass-produced car

    International Journal of Innovative Computing, Information and Control, Vol. 8, Núm. 5 B, pp. 3477-3494

20. Genetic optimization of a vehicle fuzzy decision system for intersections

    Expert Systems with Applications, Vol. 39, Núm. 18, pp. 13148-13157