Articles (36) Publications in which a researcher has participated View referenced research data.

in the year 2016 Remove filter
filter_list Type (aggr.) Articles from 2016 to 2016

2016

  1. A Review of Motion Planning Techniques for Automated Vehicles

    IEEE Transactions on Intelligent Transportation Systems, Vol. 17, Núm. 4, pp. 1135-1145

  2. A methodology for assessing local bifurcated blood vessel shape variations

    Biomedical Physics and Engineering Express, Vol. 2, Núm. 1

  3. Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants

    Fusion Engineering and Design, Vol. 109-111, pp. 1046-1052

  4. Analysis of Complex Steel Microstructures by High-Resolution EBSD

    JOM, Vol. 68, Núm. 1, pp. 215-223

  5. Analysis of the Results of Accelerated Aging Tests in Insulated Gate Bipolar Transistors

    IEEE Transactions on Power Electronics, Vol. 31, Núm. 11, pp. 7953-7962

  6. Austenite Static Recrystallization Kinetics in Microalloyed B Steels

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 47, Núm. 6, pp. 3150-3164

  7. Comparison of the damage induced by thermal shock in hardmetals and cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 61, pp. 147-150

  8. Effect of the solidification time on the median particle size of powders produced by water atomisation

    Powder Metallurgy, Vol. 59, Núm. 2, pp. 128-141

  9. Electrochemical Real-Time Analysis of Bacterial Biofilm Adhesion and Development by Means of Thin-Film Biosensors

    IEEE Sensors Journal, Vol. 16, Núm. 7, pp. 1856-1864

  10. Femtosecond laser fabrication of highly hydrophobic stainless steel surface with hierarchical structures fabricated by combining ordered microstructures and LIPSS

    Applied Surface Science, Vol. 374, pp. 81-89

  11. Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques

    RSC Advances, Vol. 6, Núm. 22, pp. 18558-18566

  12. Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

    Ceramics International, Vol. 42, Núm. 14, pp. 16417-16423

  13. Fracture strength testing of a self-passivating tungsten alloy at the micrometre scale

    Philosophical Magazine, Vol. 96, Núm. 32-34, pp. 3570-3585

  14. Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels

    Materials Science and Engineering A, Vol. 651, pp. 358-369

  15. Identification of the degradation state for condition-based maintenance of insulated gate bipolar transistors: A self-organizing map approach

    Microelectronics Reliability, Vol. 60, pp. 48-61

  16. Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength

    Shock and Vibration, Vol. 2016

  17. Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites

    Composites Part B: Engineering, Vol. 90, pp. 416-423

  18. Layout-aware design methodology for a 75 GHz power amplifier in a 55 nm SiGe technology

    Integration, the VLSI Journal, Vol. 52, pp. 208-216

  19. Manufacturing and testing of self-passivating tungsten alloys of different composition

    Nuclear Materials and Energy, Vol. 9, pp. 422-429

  20. Modelling of static recrystallization behavior of high manganese austenitic steels with different alloying contents

    ISIJ International, Vol. 56, Núm. 6, pp. 1038-1047