Articles (57)

¹ Publications considered as the unit’s output.

View referenced research data.

in the year 2025 Remove filter
filter_list Type (aggr.) Articles from 2025 to 2025

2025

  1. A Cooperative Driving Framework for Platooning Using V2X Messages in Urban Environments

    IEEE Transactions on Vehicular Technology, Vol. 74, Núm. 11, pp. 16813-16826

  2. A Fallback Localization Algorithm for Automated Vehicles Based on Object Detection and Tracking

    IEEE Open Journal of Vehicular Technology, Vol. 6, pp. 1085-1099

  3. A systematic review of acceleration-based estimation of railway track quality

    Vehicle System Dynamics

  4. Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra-Heavy Gage

    Steel Research International

  5. Assessing the impact of Modbus/TCP protocol attacks on critical infrastructure: WWTP case study

    Computers and Electrical Engineering, Vol. 126

  6. Brazeability Study of an Additively Manufactured CuCrZr Alloy to Tungsten Using Various Cu-Based Fillers

    Materials, Vol. 18, Núm. 24

  7. Cheese whey fermentation for selective VFA production: Operational parameters assessment and scale-up

    Journal of Environmental Chemical Engineering, Vol. 13, Núm. 3

  8. Coating Thickness Estimation Using a CNN-Enhanced Ultrasound Echo-Based Deconvolution

    Sensors, Vol. 25, Núm. 19

  9. Correlation between microstructure and erosion-corrosion behavior of a nickel-aluminum bronze produced by continuous casting and powder metallurgy

    Journal of Materials Research and Technology, Vol. 36, pp. 3818-3830

  10. Cost-Effective FEM Simulation Through Solid Bodies of the Thermal Behavior of Lattice Structures Printed via PBF-LB

    Applied Sciences (Switzerland), Vol. 15, Núm. 3

  11. DQ-Current Observer for Aiding the Control of Multiple Active Bridge Converters

    IEEE Open Journal of Power Electronics, Vol. 6, pp. 1685-1702

  12. Design and additive manufacturing of a lightweight aerospace electric actuator

    Open Research Europe, Vol. 4

  13. Design and showcase of a stairs-based testbed for the benchmark of exoskeleton devices: The STEPbySTEP project

    WEARABLE TECHNOLOGIES, Vol. 6

  14. DriWM®: A comprehensive Drinking Water Modelling framework for integral simulation of drinking water treatment plants

    Journal of Water Process Engineering, Vol. 76

  15. Effect of Chromium on sliding wear behavior and strain hardening behavior of Fe22Mn0.6C-xCr TWIP steel

    Journal of Materials Research and Technology, Vol. 36, pp. 6088-6098

  16. Effect of Post-HIP Heat Treatments on the Microstructural Evolution of High Temperature Ni-based Superalloy

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1249-S1254

  17. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

    International Journal of Refractory Metals and Hard Materials, Vol. 130

  18. Effect of the cooling rate on mechanical properties and microstructure of a co-precipitated Fe/Cu prealloyed powder

    Journal of Alloys and Compounds, Vol. 1042

  19. Enhanced Standard Operating Procedures for 31P NMR-Based Metabolomics in Tissue Extracts

    JACS Au, Vol. 5, Núm. 5, pp. 2285-2293

  20. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

    Optics and Laser Technology, Vol. 180