Asociación Centro Tecnológico Ceit (CEIT)

1998

1. Acicular ferrite microstructures and mechanical properties in a low carbon wrought steel

   Materials Science Forum, Vol. 284-286, pp. 245-252

2. Analysis of sharp angular notches in anisotropic materials

   International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 373-386

3. Analysis of sharp angular notches in anisotropic materials

   International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 373-386

4. Assessment of the efficiency of ring dampers for railway wheels

   Proceedings of the 23rd International Conference on Noise and Vibration Engineering, ISMA

5. Brittle fracture micromechanisms in bainitic microalloyed steels

   International Journal of Fracture, Vol. 89, Núm. 2

6. Cleavage fracture micromechanisms in Ti, Ti-V and C-Mn-B microalloyed bainitic steels

   Materials Science Forum, Vol. 284-286, pp. 351-358

7. Dissolved oxygen control and simultaneous estimation of oxygen uptake rate in activated-sludge plants

   Water Environment Research, Vol. 70, Núm. 3, pp. 316-322

8. Ductile tearing of thin sheets: A comparison of three plane stress toughness characterisation parameters

   ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III

9. Effect of temperature and strain rate on the interfacial sliding stress of a GCMC

   ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III

10. Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 974-979

11. Estudio de la influencia de la microestructura sobre la deformabilidad en caliente de un acero inoxidable dúplex

    Revista de metalurgia, Vol. 34, Núm. 0, pp. 291-295

12. Fe-Ni-Ti binder phases for TiB2-based cermets: A thermodynamic approach

    Scripta Materialia, Vol. 39, Núm. 10, pp. 1395-1400

13. Fracture behaviour and pullout analysis in ceramic matrix composites using modified Rosen's model

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 1070-1074

14. Improvement of mechanical properties in structural steels by development of acicular ferrite microstructures

    Journal of Constructional Steel Research, Vol. 46, Núm. 1-3, pp. 413-414

15. Indicios de Vida en Marte: El Meteorito ALH84001

    Boletín de Astronomía, Vol. 94, pp. 44 - 49

16. Influence of contact loss between workpiece and grinding wheel on the roundness errors in centreless grinding

    International Journal of Machine Tools and Manufacture, Vol. 38, Núm. 10-11, pp. 1371-1398

17. Influence of the interface on the energy absorption mechanisms of CMCs

    Proceedings of the ASME Turbo Expo

18. Influence of the interface on the energy absorption mechanisms of CMCs

    American Society of Mechanical Engineers (Paper)

19. Infrared absorption device for analysis of exhaust gases from moving vehicles

    Proceedings of SPIE - The International Society for Optical Engineering

20. Kinked cracks in anisotropic elastic materials

    International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 387-407