Asociación Centro Tecnológico Ceit (CEIT)

2025

1. A Grey-Box Model for Real-Time Control and Monitoring

   Lecture Notes on Data Engineering and Communications Technologies (Springer Science and Business Media Deutschland GmbH), pp. 395-405

2. A systematic review of acceleration-based estimation of railway track quality

   Vehicle System Dynamics

3. Cost-Effective FEM Simulation Through Solid Bodies of the Thermal Behavior of Lattice Structures Printed via PBF-LB

   Applied Sciences (Switzerland), Vol. 15, Núm. 3

4. Design and additive manufacturing of a lightweight aerospace electric actuator

   Open Research Europe, Vol. 4

5. Design and showcase of a stairs-based testbed for the benchmark of exoskeleton devices: The STEPbySTEP project

   WEARABLE TECHNOLOGIES, Vol. 6

6. Effect of Post-HIP Heat Treatments on the Microstructural Evolution of High Temperature Ni-based Superalloy

   Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1249-S1254

7. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

   International Journal of Refractory Metals and Hard Materials, Vol. 130

8. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

   Optics and Laser Technology, Vol. 180

9. Experimental study and numerical modelling on multi-pulse laser ablation of aluminium with femtosecond laser

   Optics and Laser Technology, Vol. 184

10. Femto-Laser Processed Metasurface With Fano Response: Applications to a High Performance Refractometric Sensor

    Photonic Sensors, Vol. 15, Núm. 2

11. Improvement of the Mechanical Properties of a P/M Ti-6Al-4V Alloy with Additions of Carbon and Silicon

    Materials Science Forum (Trans Tech Publications Ltd), pp. 73-80

12. Influence of Astroloy gas-atomized powder particle size on powder properties and HIPped impact toughness

    Journal of Alloys and Compounds, Vol. 1025

13. Interaction mechanism of radial collinear cracks on a high-speed train brake disc

    Engineering Failure Analysis, Vol. 168

14. Nickel Aluminium Bronze Alloys With Enhanced Erosion-Corrosion Resistance And Mechanical Strength

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S819-S826

15. Optimising the laser powder bed fusion processing parameters of Cu-Al-Ni shape memory alloys: microstructure and functional properties relationship

    Virtual and Physical Prototyping, Vol. 20, Núm. 1

16. Output Current Ripple in Electric Vehicles With Asymmetrical Dual Three-Phase Arrangement Applying Interleaved Carrier-Based PWM Techniques

    IEEE Access, Vol. 13, pp. 41743-41767

17. Output Current Ripple in Electric Vehicles with Asymmetrical Dual Three-Phase Arrangement Applying Interleaved Carrier-Based PWM Techniques

    IEEE Access

18. Phosphorus recovery using low-grade magnesium oxide as a magnesium source and an alkaline reagent: A pilot-scale study

    Journal of Water Process Engineering, Vol. 72

19. Powder Metallurgy Processing of TiC-FeCrMo Cermets: Sintering and Thermal Treatments

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1699-S1706

20. Study of amorphous powder cores with increased magnetic saturation and permeability

    Powder Technology, Vol. 456