Proposal and experimental verification of additive manufactured beam‐column connection designed by topological optimization

  1. Gil, Beatriz 1
  2. Goñi, Rufino 1
  3. Fábregas, María 1
  4. Bayo, Eduardo 1
  1. 1 University of Navarra Pamplona Spain
Aldizkaria:
ce/papers

ISSN: 2509-7075,  2509-7075

Argitalpen urtea: 2023

Alea: 6

Zenbakia: 3-4

Orrialdeak: 702-707

Mota: Artikulua

DOI: 10.1002/CEPA.2490 GOOGLE SCHOLAR lock_openSarbide irekia editor

Beste argitalpen batzuk: ce/papers

Lotura duten proiektuak

Análisis basado en metamodelos para uniones de acero diseñadas mediante optimización topológica aplicada a la fabricación aditiva.

32641

Laburpena

The aim of this research is to provide an alternative for the conventional design of beam-to-column connections in building structures. The new design is performed by means of Structural Topological Optimization and executed by means of additive manufacturing with steel. Regarding the methodology, the joint that would be manufactured by conventional methods (i.e. welded and bolted plates) is modelled by means of finite elements in the first place. Its behavior is obtained, as well as the boundary conditions and the loads to be applied to the part that is going to be optimized. Subsequently, a solid part is defined and optimized by means of the optimization module TOSCA. Then, the complete joint is simulated with the optimized connection, and the behavior and the weight of the material used are compared with those of the conventional joint.Some modifications are made to improve some aspects of the design. Afterwards, the optimized joint is printed with steel S316L, the connection is as-sembled with the columns and beams, and it is tested. The experimental results are analyzed to be able to make the necessary adjustments both in the connection and in the design methodology.

€ Ikusi finantzaketa

Finantzaketari buruzko informazioa

Finantzatzaile

Erreferentzia bibliografikoak

  • 10.1016/j.eng-struct.2018.11.045
  • 10.1016/j.jcsr.2020.106233
  • 10.1002/cepa.1367
  • S.Galjaard S.Hofman N.Perry S.Ren Optimizing Structural Building Elements in Metal by using Additive Manufacturing in: Proceedings of the International Association for Shell and Spatial Structures (IASS) Amsterdam 2015.
  • Z.Li K.D.Tsavdaridis L.Gardner A Review of Optimised Additively Manufactured Steel Connections for Modular Building Systems in: Industrializing Additive Manufacturing 2021.https://doi.org/10.1007/978-3-030-54334-1_25.
  • 10.1016/J.ISTRUC.2023.01.101
  • 10.1016/J.JOBE.2022.105346
  • 10.1002/stco.202000031
  • S.Galjaard S.Hofman S.Ren New Opportunities to Optimize Structural Designs in Metal by Using Additive Manufacturing in: Advances in Architectural Geometry 2014 2015.https://doi.org/10.1007/978-3-319-11418-7_6.
  • 10.1007/978-3-030-54334-1_26
  • MX3D Connector for Takenaka https://Mx3d.Com/Industries/Construction/Connector-for-Takenaka/. (n.d.).
  • Erven M., (2022), Structures and Architecture A Viable Urban Perspective?, pp. 229, 10.1201/9781003023555-28
  • ABAQUS (n.d.).
  • Dassault Systemes TOSCA Structure (n.d.).
  • 10.1016/J.ISTRUC.2020.11.061
  • 10.1016/J.ENGSTRUCT.2023.115736
  • Eurocode 3:Design of steel structures ‐ Part 1‐8: Design of joints 2005.