Publicaciones (47) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. An in-depth analysis of the hydrodynamic behaviour of a high-rate lamellar DAF tank by means of CFD simulations

    Applied Water Science, Vol. 14, Núm. 6

  2. Building energy performance metamodels for district energy management optimisation platforms

    Energy Conversion and Management: X, Vol. 21

  3. Experimental study on the temperature measurement of melt blowing fibers through use of infrared thermography

    Experimental Heat Transfer, Vol. 37, Núm. 5, pp. 462-494

  4. Patient-specific closed-loop model of the fontan circulation: Calibration and validation

    Heliyon, Vol. 10, Núm. 9

2023

  1. Crosscutting of the pollutants and building ventilation systems: a literature review

    Environmental Science and Pollution Research, Vol. 30, Núm. 25, pp. 66538-66558

  2. Estimation of thermal resistance and capacitance of a concrete wall from in situ measurements: A comparison of steady-state and dynamic models

    Energy and Buildings, Vol. 296

  3. Research into the Aerodynamic Attenuation of Hot-Melt Adhesive Fibers Produced by Multihole Melt-Blowing Nozzles

    Industrial and Engineering Chemistry Research, Vol. 62, Núm. 13, pp. 5594-5612

  4. Understanding of Flow Allows Better Tumor Microsphere Coverage

    Journal of Vascular and Interventional Radiology

2022

  1. Adaptive opaque façades and their potential to reduce thermal energy use in residential buildings: A simulation-based evaluation

    Journal of Building Physics, Vol. 45, Núm. 5, pp. 675-720

  2. Computational Fluid Dynamics Modeling of Liver Radioembolization: A Review

    CardioVascular and Interventional Radiology, Vol. 45, Núm. 1, pp. 12-20

  3. Computational Study of the Microsphere Concentration in Blood during Radioembolization

    Mathematics, Vol. 10, Núm. 22

  4. Computational study of a novel catheter for liver radioembolization

    International Journal for Numerical Methods in Biomedical Engineering, Vol. 38, Núm. 4

  5. Experimental study of fibre breakup and shot formation in melt blowing nozzle designs

    Journal of Industrial Textiles, Vol. 51, Núm. 3, pp. 3895S-3922S

  6. Experimental study on the hot-melt adhesive pattern produced by melt blowing nozzle designs

    Journal of Industrial Textiles, Vol. 51, Núm. 3, pp. 3923S-3948S

  7. Gibeleko erradioenbolizazioaren CFD simulazioak: odolaren biskositatearen eragina gibeleko hemodinamikan eta mikroesferen banaketan

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 42, pp. 339-348

  8. How Could 90Y-Loaded Microsphere Distribution Be Optimized?

    CardioVascular and Interventional Radiology

  9. Mono- and multi-diameter approaches to predict stratified flow structure by means of CFD simulations in DAF systems

    Journal of Water Process Engineering, Vol. 46

  10. Simulation and validation of the gas flow in close-coupled gas atomisation process: Influence of the inlet gas pressure and the throat width of the supersonic gas nozzle

    Powder Technology, Vol. 407

2021

  1. A proof-of-concept study of the in-vivo validation of a computational fluid dynamics model of personalized radioembolization

    Scientific Reports, Vol. 11, Núm. 1

  2. Cfd simulations of radioembolization: A proof-of-concept study on the impact of the hepatic artery tree truncation

    Mathematics, Vol. 9, Núm. 8