Publicacions en què col·labora amb José Manuel Sánchez Moreno (15)

2023

  1. Reactivity of PVD cathodic arc coated hardmetal tools with Inconel 718: Correlation between diffusion couples and tool wear in drilling tests

    Surface and Coatings Technology, Vol. 471

2021

  1. Extraction of tool wear indicators in peck-drilling of Inconel 718

    International Journal of Advanced Manufacturing Technology, Vol. 114, Núm. 9-10, pp. 2711-2720

2012

  1. Comparison of the friction and wear behaviour of WC-Ni-Co-Cr and WC-Co hardmetals in contact with steel at high temperatures

    Wear, Vol. 280-281, pp. 15-21

1998

  1. Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 974-979

  2. Influence of the interface on the energy absorption mechanisms of CMCs

    Proceedings of the ASME Turbo Expo

  3. Influence of the interface on the energy absorption mechanisms of CMCs

    American Society of Mechanical Engineers (Paper)

1997

  1. Damage evolution in a continuous fibre reinforced CMC: measurements and modelling

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 1101-1108

  2. Effect of high strain rate on the tensile behavior of Nicalon/CAS continuous-fiber ceramic composites

    Thermal and mechanical test methods and behavior of continuous-fiber ceramic composites, pp. 16-31

  3. Effect of high strain rate on the tensile behavior of Nicalon™/CAS continuous-fiber ceramic composites

    ASTM Special Technical Publication, Vol. 1309, pp. 16-30

  4. Experimental technique for high temperature and high strain rate testing of CMCs

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 737-744

  5. High strain-rate and high temperature tensile behaviour of CAS/SiC

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 729-736

  6. Localized stress redistribution after fibre fracture in brittle matrix composites

    Composites Part A: Applied Science and Manufacturing, Vol. 28, Núm. 4, pp. 347-353

  7. Modelling the tensile fracture behaviour of the reinforcing fibre yarns in ceramic matrix composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 20, Núm. 5, pp. 703-716

1996

  1. Interfacial characterization of 2D woven SiC/SiC and cross-ply 0°/90° CAS/SiC composites

    Composites Part A: Applied Science and Manufacturing, Vol. 27, Núm. 9 PART A, pp. 787-792

1995

  1. Load transfer in ceramic matrix composites

    International Journal of Fracture, Vol. 76, Núm. 3, pp. R55-R60