Publicacions en què col·labora amb Lorena Josefina Lozada Cabezas (16)

2024

  1. Effect of carbon content and cooling rate on the microstructure and hardness of TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 119

  2. Reactivity of tungsten tetraboride powders with nickel alloys: Effect of TiAl3 and Zr additions

    International Journal of Refractory Metals and Hard Materials, Vol. 123

  3. Surface texturing, residual stresses and edge treatment of hardmetal tools by means of femtosecond pulsed laser

    International Journal of Refractory Metals and Hard Materials, Vol. 118

2023

  1. Densification of WC-Fe-Ni-Co-Cr cemented carbides processed by HIP after sintering: effect of WC powder particle size

    International Journal of Refractory Metals and Hard Materials, Vol. 110

  2. Effect of pressure on sintering of TiC-Fe-Cr-Mo cermets under vacuum conditions

    International Journal of Refractory Metals and Hard Materials, Vol. 114

  3. Microstructural Analysis Of Tic-Fe-Cr-Mo Cermets Obtained By Liquid Phase Sintering

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

2022

  1. Hot isostatic pressing of WB4 and WB4-TaB2 based ultrahard materials

    International Journal of Refractory Metals and Hard Materials, Vol. 109

  2. Microstructure, mechanical properties and fracture behavior of NiCoCrTiAl and FeNiCoCr new alternative binders for WC based hardmetals

    International Journal of Refractory Metals and Hard Materials, Vol. 103

2021

  1. Reactive sintering of WC-Ni-Co-Cr-Ti-Al cemented carbides and precipitation of gamma prime in their metallic binder phases

    International Journal of Refractory Metals and Hard Materials, Vol. 95

2020

  1. An investigation into the effects of HIP after sintering of WC-ZrC-Co-Cr3C2 cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 87

  2. Effect of chromium and carbon contents on the sintering of WC-Fe-Ni-Co-Cr multicomponent alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 92

  3. Effect of milling conditions and binder phase content on liquid phase sintering of heat treatable WC-Ni-Co-Cr-Al-Ti cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 88

  4. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    Euro PM 2018 Congress and Exhibition

2019

  1. Aluminium alloying of the binder phase in WC-Ni-Co-Cr cemented carbides: AlN vs. TiAl3 additions. Effect of solution aging treatments

    Euro PM 2019 Congress and Exhibition

  2. Effect of Cr anc C contents on the sintering window of WC-Fe-Ni-Co-Cr multicomponent alloys

    Euro PM 2019 Congress and Exhibition

2018

  1. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 77, pp. 44-53