Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (17)

2023

  1. Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials

    Materials, Vol. 16, Núm. 10

2021

  1. Reactive sintering of WC-Ni-Co-Cr-Ti-Al cemented carbides and precipitation of gamma prime in their metallic binder phases

    International Journal of Refractory Metals and Hard Materials, Vol. 95

2020

  1. An investigation into the effects of HIP after sintering of WC-ZrC-Co-Cr3C2 cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 87

  2. Effect of milling conditions and binder phase content on liquid phase sintering of heat treatable WC-Ni-Co-Cr-Al-Ti cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 88

  3. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    Euro PM 2018 Congress and Exhibition

2019

  1. Aluminium alloying of the binder phase in WC-Ni-Co-Cr cemented carbides: AlN vs. TiAl3 additions. Effect of solution aging treatments

    Euro PM 2019 Congress and Exhibition

  2. Effect of Cr anc C contents on the sintering window of WC-Fe-Ni-Co-Cr multicomponent alloys

    Euro PM 2019 Congress and Exhibition

2018

  1. Comparison of the thermal shock resistance of WC based cemented carbides with Co and Co-Ni-Cr based binders

    International Journal of Refractory Metals and Hard Materials, Vol. 72, pp. 89-96

  2. Liquid phase sintering of (Ti,w)c-ni-co-cr cermets: Microstructure and abrasive wear behavior

    Solid State Phenomena

  3. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 77, pp. 44-53

2017

  1. Thermal shock resistance of cemented carbides with high binder phase content: Comparison between CO and Co-Ni-Cr based binders

    Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition

2014

  1. Synthesis of Ag–ZnO powders by means of a mechanochemical process

    Applied Physics A: Materials Science and Processing, Vol. 117, Núm. 2, pp. 871-875

2012

  1. Structural study of nanocrystalline solid solution of Cu-Mo obtained by mechanical alloying

    Materials Science and Engineering A, Vol. 548, pp. 189-194

2011

  1. Controlled densification of boron-containing stainless steels

    Advances in Powder Metallurgy and Particulate Materials - 2011, Proceedings of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011

  2. Thermodynamic aspects of liquid phase sintering B-containing P/M stainless steels

    Solid State Phenomena

  3. Thermodynamic interpretation of microstructural and liquid phase development for a B-containing PM stainless steel

    Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011

2008

  1. Sinterability, microstructure and properties of a boron-containing duplex stainless steel

    Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008