Publikationen (42) Publikationen von Lorena Lozada Cabezas

filter_list

2026

  1. Mechanical properties of heat treatable TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 136

2025

  1. Effect of powder characteristics on the sintering behavior of TiC-Fe-Cr-Mo cermets: Fe carbonyl and Cr3C2 mixtures vs. 17-4PH powders

    International Journal of Refractory Metals and Hard Materials, Vol. 130

  2. Powder Bed Fusion Laser Beam (PBF-LB) Of Grcop42. Processability And Influence Of Post-Build Heat Treatments On The Microstructure And Thermal And Mechanical Properties

    Euro Powder Metallurgy 2025 Congress and Exhibition, Euro PM 2025

  3. Powder Metallurgy Processing of TiC-FeCrMo Cermets: Sintering and Thermal Treatments

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 72, pp. S1699-S1706

  4. Sintering Behavior Of Tic-Fe-Cr-Mo And Tic-17-4PH-Cr-Mo Cermets

    Euro Powder Metallurgy 2025 Congress and Exhibition, Euro PM 2025

2024

  1. Effect of carbon content and cooling rate on the microstructure and hardness of TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 119

  2. New Ultrahard Ceramics And Ceramic-metal Composites Based On Tungsten Tetraboride

    Proceedings - Euro PM 2024 Congress and Exhibition

  3. Processing of WC with Fe-based alternative binders: Adjustment of C content and effect of Cr addition

    International Journal of Refractory Metals and Hard Materials, Vol. 118

  4. Reactivity of tungsten tetraboride powders with nickel alloys: Effect of TiAl3 and Zr additions

    International Journal of Refractory Metals and Hard Materials, Vol. 123

  5. Surface texturing, residual stresses and edge treatment of hardmetal tools by means of femtosecond pulsed laser

    International Journal of Refractory Metals and Hard Materials, Vol. 118

2023

  1. Densification of WC-Fe-Ni-Co-Cr cemented carbides processed by HIP after sintering: effect of WC powder particle size

    International Journal of Refractory Metals and Hard Materials, Vol. 110

  2. Effect of pressure on sintering of TiC-Fe-Cr-Mo cermets under vacuum conditions

    International Journal of Refractory Metals and Hard Materials, Vol. 114

  3. Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials

    Materials, Vol. 16, Núm. 10

  4. Fracture mechanics analysis of hardmetals by using artificial small-scale flaws machined at the surface through short-pulse laser ablation

    International Journal of Refractory Metals and Hard Materials, Vol. 111

  5. Micromechanical properties of Yttria-doped zirconia ceramics manufactured by direct ink writing

    Journal of the European Ceramic Society, Vol. 43, Núm. 7, pp. 2884-2893

  6. Microstructural Analysis Of Tic-Fe-Cr-Mo Cermets Obtained By Liquid Phase Sintering

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  7. Nanoscratch Testing of 3Al2O3·2SiO2 EBCs: Assessment of Induced Damage and Estimation of Adhesion Strength

    Ceramics, Vol. 6, Núm. 1, pp. 664-677

  8. Testing length-scale considerations in mechanical characterization of WC-Co hardmetal produced via binder jetting 3D printing

    International Journal of Refractory Metals and Hard Materials, Vol. 111

2022

  1. Densification And Microstructural Characterization Of WB4 Based Ultrahard Materials

    World PM 2022 Congress Proceedings

  2. Hot isostatic pressing of WB4 and WB4-TaB2 based ultrahard materials

    International Journal of Refractory Metals and Hard Materials, Vol. 109