Publicaciones en las que colabora con José María Rodríguez Ibabe (18)

2024

  1. Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels

    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 110, Núm. 2, pp. 72-82

2023

  1. Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels

    ISIJ International, Vol. 63, Núm. 6, pp. 1066-1074

  2. Production of a Non-Stoichiometric Nb-Ti HSLA Steel by Thermomechanical Processing on a Steckel Mill

    Metals, Vol. 13, Núm. 2

2022

  1. Effect of Plate Rolling Strategy and Nb Microalloying in the HAZ Performance After Welding

    AISTech - Iron and Steel Technology Conference Proceedings

2021

  1. Analysis of strain partitioning in intercritically deformed microstructures via interrupted tensile tests

    Metals, Vol. 11, Núm. 1, pp. 1-19

2020

  1. On the characterization procedure to quantify the contribution of microstructure on mechanical properties in intercritically deformed low carbon HSLA steels

    Materials Science and Engineering A, Vol. 792

  2. Relación entre microestructura y propiedades mecánicas en aceros de bajo C y microaleados con Nb-V deformados intercríticamente

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  3. Relation between microstructure and mechanical properties on intercritically deformed low carbon steels

    Procedia Manufacturing

2019

  1. An EBSD-based methodology for the characterization of intercritically deformed low carbon steel

    Materials Characterization, Vol. 147, pp. 31-42

  2. Interaction between microalloying additions and phase transformation during intercritical deformation in low carbon steels

    Metals, Vol. 9, Núm. 10

2018

  1. Effect of microstructure on post-rolling induction treatment in a low C Ti-Mo microalloyed steel

    Metals, Vol. 8, Núm. 9

  2. Precipitation Strengthening by Induction Treatment in High Strength Low Carbon Microalloyed Hot-Rolled Plates

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 49, Núm. 3, pp. 946-961

2017

  1. Effect of intercritical deformation on final microstructure in low carbon grades

    Materials Science and Technology Conference and Exhibition 2017, MS and T 2017

  2. Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo microalloyed steels

    Metals, Vol. 7, Núm. 2

  3. Optimized cost-effective production of structural hot-rolled CSP coils through proper austenite conditioning

    AISTech - Iron and Steel Technology Conference Proceedings

2016

  1. Effect of the time between last deformation pass and accelerated cooling on the mechanical properties in nb and nb-mo microalloyed steels

    Key Engineering Materials

  2. Precipitation strengthening by induction treatment in high strength low carbon microalloyed hot rolled plates

    Materials Science and Technology Conference and Exhibition 2016, MS and T 2016

2015

  1. Relevance of time between last deformation pass and accelerated cooling on the microstructural refinement in Nb and Nb-Mo microalloyed steels

    Materials Science and Technology Conference and Exhibition 2015, MS and T 2015