Javier
Aldazábal Mensa
Catedrático de Universidad
Centro de Estudios e Investigaciones Técnicas de Gipuzkoa
San Sebastián, EspañaPublicacións en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (16)
2020
-
Plastically-induced volume deformation of nanocrystalline α-Fe with a <110> columnar structure
Metals, Vol. 10, Núm. 12, pp. 1-10
2016
-
Characterization of heat affected zones produced by thermal cutting processes by means of Small Punch tests
Materials Characterization, Vol. 119, pp. 55-64
-
Definition and validation of Eurocode 3 FAT classes for structural steels containing oxy-fuel, plasma and laser cut holes
International Journal of Fatigue, Vol. 87, pp. 50-58
-
Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges
Procedia Engineering
-
Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of Eurocode 3 FAT classes
Engineering Structures, Vol. 111, pp. 152-161
-
Strengthening by intermetallic nanoprecipitation in Fe-Cr-Al-Ti alloy
Acta Materialia, Vol. 107, pp. 27-37
2015
-
Coexisting α'-β' nanoscale precipitation in an Fe-Cr-Al-Ti alloy
PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015
-
Couple stresses and the fracture of rock
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, Núm. 2038
-
Fatigue Performance of Thermally Cut Bolt Holes in Structural Steel S460 M
Procedia Engineering
2011
-
Diffusional Monte Carlo model of liquid-phase sintering
Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580
2010
-
Computer simulation of scaffold degradation
Journal of Physics: Conference Series
-
Geometrical Monte Carlo model of liquid-phase sintering
Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486
-
Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions
Materials Research Society Symposium Proceedings
2009
-
Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper
Physica Status Solidi (C) Current Topics in Solid State Physics
2005
-
Simulation of the microstructural evolution during liquid phase sintering using a geometrical Monte Carlo model
Modelling and Simulation in Materials Science and Engineering, Vol. 13, Núm. 7, pp. 1057-1070
2002
-
A mesoscopic plasticity model accounting for spatial fluctuations of plastic strains, internal stresses and dislocation densities
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, Vol. 93, Núm. 7, pp. 681-688