José María
Rodríguez Ibabe
Investigador hasta 2023
Nerea
Isasti Gordobil
Investigadora Senior
Publicaciones en las que colabora con Nerea Isasti Gordobil (18)
2024
-
Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 110, Núm. 2, pp. 72-82
2023
-
Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels
ISIJ International, Vol. 63, Núm. 6, pp. 1066-1074
-
Production of a Non-Stoichiometric Nb-Ti HSLA Steel by Thermomechanical Processing on a Steckel Mill
Metals, Vol. 13, Núm. 2
2022
-
Effect of Plate Rolling Strategy and Nb Microalloying in the HAZ Performance After Welding
AISTech - Iron and Steel Technology Conference Proceedings
2021
-
Analysis of strain partitioning in intercritically deformed microstructures via interrupted tensile tests
Metals, Vol. 11, Núm. 1, pp. 1-19
2020
-
On the characterization procedure to quantify the contribution of microstructure on mechanical properties in intercritically deformed low carbon HSLA steels
Materials Science and Engineering A, Vol. 792
-
Relación entre microestructura y propiedades mecánicas en aceros de bajo C y microaleados con Nb-V deformados intercríticamente
TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie
-
Relation between microstructure and mechanical properties on intercritically deformed low carbon steels
Procedia Manufacturing
2019
-
An EBSD-based methodology for the characterization of intercritically deformed low carbon steel
Materials Characterization, Vol. 147, pp. 31-42
-
Interaction between microalloying additions and phase transformation during intercritical deformation in low carbon steels
Metals, Vol. 9, Núm. 10
2018
-
Effect of microstructure on post-rolling induction treatment in a low C Ti-Mo microalloyed steel
Metals, Vol. 8, Núm. 9
-
Precipitation Strengthening by Induction Treatment in High Strength Low Carbon Microalloyed Hot-Rolled Plates
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 49, Núm. 3, pp. 946-961
2017
-
Effect of intercritical deformation on final microstructure in low carbon grades
Materials Science and Technology Conference and Exhibition 2017, MS and T 2017
-
Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo microalloyed steels
Metals, Vol. 7, Núm. 2
-
Optimized cost-effective production of structural hot-rolled CSP coils through proper austenite conditioning
AISTech - Iron and Steel Technology Conference Proceedings
2016
-
Effect of the time between last deformation pass and accelerated cooling on the mechanical properties in nb and nb-mo microalloyed steels
Key Engineering Materials
-
Precipitation strengthening by induction treatment in high strength low carbon microalloyed hot rolled plates
Materials Science and Technology Conference and Exhibition 2016, MS and T 2016
2015
-
Relevance of time between last deformation pass and accelerated cooling on the microstructural refinement in Nb and Nb-Mo microalloyed steels
Materials Science and Technology Conference and Exhibition 2015, MS and T 2015