Publikationen, an denen er mitarbeitet Gemma García Mandayo (33)

2021

  1. Low temperature NO2gas sensing with ZnO nanostructured by laser interference lithography

    RSC Advances, Vol. 11, Núm. 54, pp. 34144-34151

  2. Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition

    RSC Advances, Vol. 11, Núm. 30, pp. 18493-18499

2018

  1. ZnO nanoneedles grown on chip for selective NO2 detection indoors

    Sensors and Actuators, B: Chemical, Vol. 255, pp. 1244-1253

2017

  1. Multisensor platform for indoor air quality measurements

    2017 Spanish Conference on Electron Devices, CDE 2017

  2. Temperature simulation at ZnO surface processed by laser interference lithography

    Proceedings of SPIE - The International Society for Optical Engineering

  3. Thin-film Potentiometric Sensor to Detect CO2 Concentrations Ranging Between 2 % and 100 %

    Electroanalysis, Vol. 29, Núm. 10, pp. 2358-2364

2016

  1. Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques

    RSC Advances, Vol. 6, Núm. 22, pp. 18558-18566

2015

  1. Enhanced features of Li2CO3 sputtered thin films induced by thickness and annealing time

    CrystEngComm, Vol. 17, Núm. 7, pp. 1597-1602

  2. System to control indoor air quality in energy efficient buildings

    Urban Climate, Vol. 14, pp. 475-485

  3. ZnO conductometric sensor for indoor air quality measurement inside buildings

    Proceedings of the 2015 10th Spanish Conference on Electron Devices, CDE 2015

  4. ZnO nanostructures to detect low concentrations of indoor pollutants

    Procedia Engineering

2014

  1. High-sensitivity indoor-air-quality sensor through localized growth of ZnO nanostructures

    Procedia Engineering

  2. Li2CO3 thin films fabricated by sputtering techniques: The role of temperature on their properties

    CrystEngComm, Vol. 16, Núm. 27, pp. 6033-6038

2013

  1. Structural and optical properties of WO 3 sputtered thin films nanostructured by laser interference lithography

    Applied Surface Science, Vol. 276, pp. 229-235

  2. Conductometric formaldehyde gas sensors. A review: From conventional films to nanostructured materials

    Thin Solid Films, Vol. 548, pp. 665-676

  3. Design and fabrication of sensor structures for the measurement of toxic gases

    Proceedings of the 2013 Spanish Conference on Electron Devices, CDE 2013

  4. Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres

    Acta Materialia, Vol. 61, Núm. 4, pp. 1146-1153

2012

  1. SnO2-nanowires grown by catalytic oxidation of tin sputtered thin films for formaldehyde detection

    Thin Solid Films

2011

  1. Performance of a CO2 impedimetric sensor prototype for air quality monitoring

    Sensors, Vol. 11, Núm. 5, pp. 5047-5057

  2. Physical characterization of YSZ solid electrolyte thin films fabricated by sputtering techniques

    Proceedings of the 8th Spanish Conference on Electron Devices, CDE'2011