Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (61)

2021

  1. Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition

    RSC Advances, Vol. 11, Núm. 30, pp. 18493-18499

2020

  1. Electrical and electrochemical properties of imidazolium and phosphonium-based pNIPAAM ionogels

    Electrochimica Acta, Vol. 345

  2. Imidazole-based ionogel as room temperature benzene and formaldehyde sensor

    Microchimica Acta, Vol. 187, Núm. 12

2018

  1. AZO Embedded Interdigitated Electrodes for Monitoring Stimuli Responsive Materials

    Advanced Functional Materials, Vol. 28, Núm. 48

  2. Elucidating the role of the ionic liquid in the actuation behavior of thermo-responsive ionogels

    Sensors and Actuators, B: Chemical, Vol. 260, pp. 380-387

  3. ZnO nanoneedles grown on chip for selective NO2 detection indoors

    Sensors and Actuators, B: Chemical, Vol. 255, pp. 1244-1253

2017

  1. Electrochemical characterization of ionogel actuators

    2017 Spanish Conference on Electron Devices, CDE 2017

  2. Manipulation of fluid flow direction in microfluidic paper-based analytical devices with an ionogel negative passive pump

    Sensors and Actuators, B: Chemical, Vol. 247, pp. 114-123

2016

  1. Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques

    RSC Advances, Vol. 6, Núm. 22, pp. 18558-18566

  2. Understanding the Behavior of Stimuli-response Ionogels for Microfluidic Applications

    Procedia Engineering

2015

  1. Enhanced features of Li2CO3 sputtered thin films induced by thickness and annealing time

    CrystEngComm, Vol. 17, Núm. 7, pp. 1597-1602

  2. ZnO nanostructures to detect low concentrations of indoor pollutants

    Procedia Engineering

2014

  1. High-sensitivity indoor-air-quality sensor through localized growth of ZnO nanostructures

    Procedia Engineering

  2. Li2CO3 thin films fabricated by sputtering techniques: The role of temperature on their properties

    CrystEngComm, Vol. 16, Núm. 27, pp. 6033-6038

2013

  1. Conductometric formaldehyde gas sensors. A review: From conventional films to nanostructured materials

    Thin Solid Films, Vol. 548, pp. 665-676

  2. Design and fabrication of sensor structures for the measurement of toxic gases

    Proceedings of the 2013 Spanish Conference on Electron Devices, CDE 2013

  3. Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres

    Acta Materialia, Vol. 61, Núm. 4, pp. 1146-1153

2012

  1. SnO2-nanowires grown by catalytic oxidation of tin sputtered thin films for formaldehyde detection

    Thin Solid Films

2011

  1. Performance of a CO2 impedimetric sensor prototype for air quality monitoring

    Sensors, Vol. 11, Núm. 5, pp. 5047-5057

  2. Periodic patterning of silicon by direct nanosecond laser interference ablation

    Applied Surface Science, Vol. 258, Núm. 3, pp. 1175-1180