José Manuel
Martín García
Investigador Principal
Centro de Estudios e Investigaciones Técnicas de Gipuzkoa
San Sebastián, EspañaPublicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (22)
2021
2020
-
Development of a process to manufacture spherical nanoreinforced titanium alloy powders for additive manufacturing
Euro PM 2018 Congress and Exhibition
-
Injection of ceramic nanoparticles during gas atomization to produce metal matrix nanocomposite powders
Euro PM 2018 Congress and Exhibition
2019
-
Effect of composition and particle size on the soft magnetic character of Fe-rich amorphous alloys obtained by gas atomization
Euro PM 2019 Congress and Exhibition
-
Influence of some geometric features of the atomisation chamber on particle agglomeration and satellite formation during gas atomisation
Euro PM 2019 Congress and Exhibition
2017
-
Compression moulding of gas atomised La-Fe-Si alloys for magnetic refrigeration applications
Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition
-
Influence of the atomiser geometry on the gas flow in close-coupled gas atomisation
Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition
2016
-
Effect of the solidification time on the median particle size of powders produced by water atomisation
Powder Metallurgy, Vol. 59, Núm. 2, pp. 128-141
-
Manufacturing of a magnetocaloric component by uniaxial pressing and sintering of La-Fe-Co-Si alloy powders produced by gas atomization
World PM 2016 Congress and Exhibition
2013
-
Experimental study and simulation of the gas flow in the atomisation chamber during close-coupled gas atomisation
International Powder Metallurgy Congress and Exhibition, Euro PM 2013
2010
-
The initial stage of liquid phase sintering for an Al-14Si-2.5Cu-0.5Mg (wt%) P/M alloy
Materials Science and Engineering: A, Vol. 527, Núm. 16-17, pp. 3949-3966
2009
-
Effect of the heat treatment prior to extrusion on the direct hot-extrusion of aluminium powder compacts
Journal of Alloys and Compounds, Vol. 467, Núm. 1-2, pp. 191-201
2008
-
Alloy design concepts for Al-14Si-Cu-Mg-Zn (Wt%) P/M alloys
Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008
-
Master sintering curve for densification derived from a constitutive equation with consideration of grain growth: Application to tungsten heavy alloys
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 39, Núm. 12, pp. 2941-2948
2007
-
Sintering and extrusion of an Al-14Si-2.5Cu-0.5Mg P/M alloy
Proceedings of the Euro Powder Metallurgy Congress and Exhibition, Euro PM 2007
-
Sintering response & microstructural evolution of an Al-Cu-Mg-Si premix
International Journal of Powder Metallurgy (Princeton, New Jersey), Vol. 43, Núm. 6, pp. 59-69
2006
-
Densification behavior of tungsten heavy alloy based on master sintering curve concept
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 9, pp. 2837-2848
-
Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 11, pp. 3337-3346
-
Microstructural evolution of Tungsten heavy alloys during heating to the sintering temperature
Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2006