Publicacions (60) Publicacions de José Manuel Martín García

2024

  1. Development of anisotropic Nd-Fe-B powder from isotropic gas atomized powder

    Powder Technology, Vol. 431

  2. Extremely low coercivity of powder Co-rich amorphous alloy obtained by gas atomisation

    Journal of Alloys and Compounds, Vol. 990

  3. In situ synthesis of titanium alloy powders reinforced with nanoparticles for powder bed fusion: A step towards safer and more sustainable manufacturing

    Additive Manufacturing, Vol. 82

  4. Study of an iron phosphate soft magnetic composite and its stability at high temperatures

    Ceramics International, Vol. 50, Núm. 13, pp. 22468-22478

2023

  1. Advances In The Numerical Modelling Of The Close-Coupled Gas Atomisation Process: Optimal Coupling Between Primary And Secondary Atomisation Stages

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  2. Effect of temperature on particle shape, size, and polycrystallinity of Nd-Fe-B powders obtained by hydrogen decrepitation

    Journal of Materials Research and Technology, Vol. 24, pp. 1454-1467

  3. Electric Aerospace Actuator Manufactured by Laser Powder Bed Fusion

    Aerospace, Vol. 10, Núm. 9

  4. Improvement Of The Magnetic Properties Of Powder Cores By Optimizing The Volume Fraction Of Amorphous Material

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  5. Novel composition of Nd-Fe-B gas atomized powder to produce compression bonded magnets

    Advanced Powder Technology, Vol. 34, Núm. 11

  6. Short-Loop Recycling Of Nd-Fe-B Scrap By Gas Atomization

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  7. Study Of The Grain Growth Of Nd-Fe-B Atomized Powders With Different Nd Contents And The Addition Of Nb And Ga As Doping Metals

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

2022

  1. Characterization Of Soft Magnetic Composites With Ceramic Coating Produced By Hot Press

    World PM 2022 Congress Proceedings

  2. Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 187

  3. Efficient Modelling Of Primary And Secondary Atomisation In Close-Coupled Gas Atomisers

    World PM 2022 Congress Proceedings

  4. Multiphase model to predict particle size distributions in close-coupled gas atomization

    International Journal of Multiphase Flow, Vol. 154

  5. Simulation and validation of the gas flow in close-coupled gas atomisation process: Influence of the inlet gas pressure and the throat width of the supersonic gas nozzle

    Powder Technology, Vol. 407

2021

  1. Effect of neodymium content and niobium addition on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 172

  2. Experimental study of the influence of operational and geometric variables on the powders produced by close-coupled gas atomisation

    Materials and Design, Vol. 199

  3. Fundamental study of the hydrogen decrepitation process of Nd-Fe-B alloys

    Euro PM2021 Congress Proceedings

  4. Novel predictive methodology of amorphisation of gas-atomised Fe-Si-B alloy powders

    Journal of Non-Crystalline Solids, Vol. 574