Publicaciones en las que colabora con José María Rodríguez Ibabe (54)

2024

  1. Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels

    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 110, Núm. 2, pp. 72-82

2023

  1. Effect of Nb on Grain Growth Behavior in the Heat Affected Zone of Linepipe Steels

    ISIJ International, Vol. 63, Núm. 6, pp. 1066-1074

  2. Production of a Non-Stoichiometric Nb-Ti HSLA Steel by Thermomechanical Processing on a Steckel Mill

    Metals, Vol. 13, Núm. 2

2022

  1. Effect of Plate Rolling Strategy and Nb Microalloying in the HAZ Performance After Welding

    AISTech - Iron and Steel Technology Conference Proceedings

  2. Effect of Reheating Temperature on TMP in Nb-based Microalloyed Steels

    6th International Conference on ThermoMechanical Processing, TMP 2022 - Proceedings

  3. The Non-recrystallization Temperature in Nb-based Steels: from Laboratory to Industrial Conditions

    6th International Conference on ThermoMechanical Processing, TMP 2022 - Proceedings

2021

  1. Analysis of strain partitioning in intercritically deformed microstructures via interrupted tensile tests

    Metals, Vol. 11, Núm. 1, pp. 1-19

2020

  1. On the characterization procedure to quantify the contribution of microstructure on mechanical properties in intercritically deformed low carbon HSLA steels

    Materials Science and Engineering A, Vol. 792

  2. Relation between microstructure and mechanical properties on intercritically deformed low carbon steels

    Procedia Manufacturing

  3. Thermomechanical processing of steels

    Metals

2019

  1. An EBSD-based methodology for the characterization of intercritically deformed low carbon steel

    Materials Characterization, Vol. 147, pp. 31-42

  2. Interaction between microalloying additions and phase transformation during intercritical deformation in low carbon steels

    Metals, Vol. 9, Núm. 10

  3. Revisiting the role of Nb microalloying in medium-high carbon steels

    Materials Science and Technology 2018, MS and T 2018

2018

  1. Effect of microstructure on post-rolling induction treatment in a low C Ti-Mo microalloyed steel

    Metals, Vol. 8, Núm. 9

  2. Microalloying additions to commodity c-mn structural steels: Fundamental strengthening mechanisms leading to improvements in mechanical properties, alloy optimization, reduced alloy costs and robustness of hot rolling processing

    Materials Science Forum

  3. Precipitation Strengthening by Induction Treatment in High Strength Low Carbon Microalloyed Hot-Rolled Plates

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 49, Núm. 3, pp. 946-961

2017

  1. Effect of intercritical deformation on final microstructure in low carbon grades

    Materials Science and Technology Conference and Exhibition 2017, MS and T 2017

  2. Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo microalloyed steels

    Metals, Vol. 7, Núm. 2

  3. Optimized cost-effective production of structural hot-rolled CSP coils through proper austenite conditioning

    AISTech - Iron and Steel Technology Conference Proceedings

2016

  1. Application of practical modeling of microalloyed steels for improved metallurgy, productivity and cost reduction in hot strip mill applications

    AISTech - Iron and Steel Technology Conference Proceedings