Publicaciones (29) Publicaciones de Ibon Elosegui Simón

2023

  1. Normalised flux weakening control technique acting on the actual speed for automotive dual three-phase IPMSMs

    2023 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2023

  2. Novel composition of Nd-Fe-B gas atomized powder to produce compression bonded magnets

    Advanced Powder Technology, Vol. 34, Núm. 11

2022

  1. A Practical Approach for Estimating Bundle-Level Proximity Losses in AC Machines

    IEEE Transactions on Industrial Electronics, Vol. 69, Núm. 12, pp. 12173-12181

  2. Normalised hybrid flux weakening strategy for automotive asymmetrical dual three-phase IPMSMs

    IECON Proceedings (Industrial Electronics Conference)

  3. Review of High Power and High Voltage Electric Motors for Single-Aisle Regional Aircraft

    IEEE Access, Vol. 10, pp. 112989-113004

2021

  1. Eliminating rare earth permanent magnets on low-speed high-torque machines: A performance and cost comparison of synchronous reluctance machines, ferrite permanent magnet-synchronous reluctance machines and permanent magnet synchronous machines for a direct-drive elevator system

    IET Electric Power Applications, Vol. 15, Núm. 3, pp. 370-378

  2. Improving the Performance of a 1-MW Induction Machine by Optimally Shifting from a Three-Phase to a Six-Phase Machine Design by Rearranging the Coil Connections

    IEEE Transactions on Industrial Electronics, Vol. 68, Núm. 2, pp. 1035-1045

2020

  1. Multidisciplinary analysis of a 750 kW PMSM for marine propulsion including shock loading response

    IET Electric Power Applications, Vol. 14, Núm. 10, pp. 1933-1943

2018

  1. Node mapping criterion for highly saturated interior PMSMs using magnetic reluctance network

    Energies, Vol. 11, Núm. 9

  2. Optimal pole number and winding designs for low speed-high torque synchronous reluctance machines

    Energies, Vol. 11, Núm. 1

  3. Wafter design for totally enclosed electric machines

    Applied Thermal Engineering, Vol. 129, pp. 93-105

2017

  1. Design criteria for water cooled systems of induction machines

    Applied Thermal Engineering, Vol. 114, pp. 1018-1028

  2. Small signal modeling and transient analysis of a Trans quasi-Z-source inverter

    Electric Power Systems Research, Vol. 144, pp. 52-62

2016

  1. A simple model for fault analysis of multiphase PMSM drives

    2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016

  2. Analysis and comparison of algebraic approaches for highly saturated Surface PMSM

    2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2016

2015

  1. Analysis of relevant aspects of thermal and hydraulic modeling of electric machines. Application in an Open Self Ventilated machine

    Applied Thermal Engineering, Vol. 75, pp. 277-288

  2. Analytical Calculation of the Slot Leakage Inductance in Fractional-Slot Concentrated-Winding Machines

    IEEE Transactions on Industrial Electronics, Vol. 62, Núm. 5, pp. 2742-2752

  3. Coupled thermal and hydraulic algebraic models for an open self-ventilated induction machine

    IET Electric Power Applications, Vol. 9, Núm. 8, pp. 513-522

  4. Fault-tolerant permanent magnet synchronous machine - phase, pole and slot number selection criterion based on inductance calculation

    IET Electric Power Applications, Vol. 9, Núm. 2, pp. 138-149

  5. Manufacturing of isotropic bonded NdFeB Magnets from Gas atomised powders

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition