Publicacións (66) Publicacións de Jon Joseba Etxeberria Uranga

2023

  1. Hydrodynamics and electrical insulation of PbLi flow with SiC flow channel inserts in a strong magnetic field

    Fusion Engineering and Design, Vol. 194

2022

  1. Fabrication and characterization of SiC sandwich material for Flow Channel Inserts in HT-DCLL blanket by gel casting

    Nuclear Materials and Energy, Vol. 30

2020

  1. Hot Pressing of Iron-based Friction Materials

    Proceedings - Euro PM2020 Congress and Exhibition

  2. Hot pressing of sintered-metal friction materials for railways braking applications

    Euro PM 2018 Congress and Exhibition

  3. Towards improving low-temperature degradation of zirconia/alumina ceramics via in-situ formation of an Al2O3 functional surface layer through sintering in the presence of graphite powder

    Journal of Alloys and Compounds, Vol. 818

2019

  1. Characterization and thermomechanical assessment of a SiC-sandwich material for Flow Channel Inserts in DCLL blankets

    Fusion Engineering and Design, Vol. 146, pp. 1983-1987

  2. Friction behaviour of hot pressed sintered-metal friction materials for railways braking applications

    Euro PM 2019 Congress and Exhibition

  3. Influence of abrasives and graphite on processing and properties of sintered metallic friction materials

    Heliyon, Vol. 5, Núm. 8

  4. Production of porous SiC by liquid phase sintering using graphite as sacrificial phase: Influence of SiO2 and graphite on the sintering mechanisms

    Journal of the European Ceramic Society, Vol. 39, Núm. 14, pp. 3949-3958

2018

  1. Development, Characterization, and Testing of a SiC-Based Material for Flow Channel Inserts in High-Temperature DCLL Blankets

    IEEE Transactions on Plasma Science, Vol. 46, Núm. 5, pp. 1561-1569

2017

  1. Effect of low-content of carbon nanotubes on the fracture toughness and hardness of carbon nanotube reinforced alumina prepared by sinter, HIP and sinter + HIP routes

    Materials Research Express, Vol. 4, Núm. 8

  2. SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: Manufacturing, characterization, corrosion tests

    Fusion Engineering and Design, Vol. 124, pp. 958-963

2016

  1. Development of iron-based alloys for copper-free organic brake pads

    World PM 2016 Congress and Exhibition

  2. Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

    Ceramics International, Vol. 42, Núm. 14, pp. 16417-16423

  3. SWCNTs versus MWCNTs as Reinforcement Agents in Zirconia-and Alumina-based Nanocomposites: Which One to Use

    Advanced Ceramics (Wiley Blackwell), pp. 261-297

  4. Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: Is it justifiable the effort to reinforce them?

    Ceramics International, Vol. 42, Núm. 1, pp. 2054-2062

  5. Towards a better understanding of the reaction between metal powders and the solid lubricant Sb2S3 in a low-metallic brake pad at high temperature

    Wear, Vol. 348-349, pp. 27-42

2015

  1. Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: A novel way to delay hydrothermal degradation

    Ceramics International, Vol. 41, Núm. 3, pp. 4569-4580

  2. Solid lubricants-metal powders reactions in low-metallic brake pads during braking action

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition

2014

  1. Development of copper-free low steel brake pads for passenger cars

    Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014