José Manuel
Sánchez Moreno
Investigador Principal Senior
Centro de Estudios e Investigaciones Técnicas de Gipuzkoa
San Sebastián, EspañaPublications en collaboration avec des chercheurs de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (79)
2021
-
Extraction of tool wear indicators in peck-drilling of Inconel 718
International Journal of Advanced Manufacturing Technology, Vol. 114, Núm. 9-10, pp. 2711-2720
-
Reactive sintering of WC-Ni-Co-Cr-Ti-Al cemented carbides and precipitation of gamma prime in their metallic binder phases
International Journal of Refractory Metals and Hard Materials, Vol. 95
2020
-
An investigation into the effects of HIP after sintering of WC-ZrC-Co-Cr3C2 cemented carbides
International Journal of Refractory Metals and Hard Materials, Vol. 87
-
Effect of milling conditions and binder phase content on liquid phase sintering of heat treatable WC-Ni-Co-Cr-Al-Ti cemented carbides
International Journal of Refractory Metals and Hard Materials, Vol. 88
-
Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys
Euro PM 2018 Congress and Exhibition
2019
-
Aluminium alloying of the binder phase in WC-Ni-Co-Cr cemented carbides: AlN vs. TiAl3 additions. Effect of solution aging treatments
Euro PM 2019 Congress and Exhibition
-
Effect of Cr anc C contents on the sintering window of WC-Fe-Ni-Co-Cr multicomponent alloys
Euro PM 2019 Congress and Exhibition
-
Influence of process parameters on the magnetic properties of MIM parts used for aerospace actuation systems
Euro PM 2019 Congress and Exhibition
-
Microscale Mechanical Properties Testing and Simulation
Proceedings - 2018 Nanotechnology for Instrumentation and Measurement, NANOfIM 2018
2018
-
Comparison of the thermal shock resistance of WC based cemented carbides with Co and Co-Ni-Cr based binders
International Journal of Refractory Metals and Hard Materials, Vol. 72, pp. 89-96
-
Liquid phase sintering of (Ti,w)c-ni-co-cr cermets: Microstructure and abrasive wear behavior
Solid State Phenomena
-
Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys
International Journal of Refractory Metals and Hard Materials, Vol. 77, pp. 44-53
2017
-
Fatigue testing and properties of hardmetals in the gigacycle range
International Journal of Refractory Metals and Hard Materials, Vol. 62, pp. 183-191
-
Presintering of TiCN-TiC-WC-Cr3C2-Ni cermets under N2-H2 atmospheres
International Journal of Refractory Metals and Hard Materials, Vol. 62, pp. 21-28
-
Thermal shock resistance of cemented carbides with high binder phase content: Comparison between CO and Co-Ni-Cr based binders
Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition
2016
-
Comparison of the damage induced by thermal shock in hardmetals and cermets
International Journal of Refractory Metals and Hard Materials, Vol. 61, pp. 147-150
-
Damage induced by thermal shock in hardmetals and cermets
World PM 2016 Congress and Exhibition
-
Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites
Composites Part B: Engineering, Vol. 90, pp. 416-423
2015
-
Presintering of ticn-Tic-wc-cr3c2-ni cermets under h2 or n2-h2 atmospheres
Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition
2014
-
"in-situ" mechanical characterisation of WC-Co hardmetals using microbeam testing
International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 236-240