Publicaciones (112) Publicaciones de José Manuel Sánchez Moreno

2024

  1. Effect of carbon content and cooling rate on the microstructure and hardness of TiC-Fe-Cr-Mo cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 119

  2. Experimental investigation and thermodynamic modelling of WC-Fe-Ni-Co-Cr cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 124

  3. Reactivity of tungsten tetraboride powders with nickel alloys: Effect of TiAl3 and Zr additions

    International Journal of Refractory Metals and Hard Materials, Vol. 123

  4. Surface texturing, residual stresses and edge treatment of hardmetal tools by means of femtosecond pulsed laser

    International Journal of Refractory Metals and Hard Materials, Vol. 118

2023

  1. Densification of WC-Fe-Ni-Co-Cr cemented carbides processed by HIP after sintering: effect of WC powder particle size

    International Journal of Refractory Metals and Hard Materials, Vol. 110

  2. Digital image correlation after focused ion beam micro-slit drilling: A new technique for measuring residual stresses in hardmetal components at local scale

    International Journal of Refractory Metals and Hard Materials, Vol. 112

  3. Effect of pressure on sintering of TiC-Fe-Cr-Mo cermets under vacuum conditions

    International Journal of Refractory Metals and Hard Materials, Vol. 114

  4. Microstructural Analysis Of Tic-Fe-Cr-Mo Cermets Obtained By Liquid Phase Sintering

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  5. Reactivity of PVD cathodic arc coated hardmetal tools with Inconel 718: Correlation between diffusion couples and tool wear in drilling tests

    Surface and Coatings Technology, Vol. 471

2022

  1. Densification And Microstructural Characterization Of WB4 Based Ultrahard Materials

    World PM 2022 Congress Proceedings

  2. Experimental and theoretical study of WC-40Fe-20Co-40Ni

    International Journal of Refractory Metals and Hard Materials, Vol. 102

  3. Hot isostatic pressing of WB4 and WB4-TaB2 based ultrahard materials

    International Journal of Refractory Metals and Hard Materials, Vol. 109

  4. Microstructure, mechanical properties and fracture behavior of NiCoCrTiAl and FeNiCoCr new alternative binders for WC based hardmetals

    International Journal of Refractory Metals and Hard Materials, Vol. 103

2021

  1. Extraction of tool wear indicators in peck-drilling of Inconel 718

    International Journal of Advanced Manufacturing Technology, Vol. 114, Núm. 9-10, pp. 2711-2720

  2. Femtosecond Laser Processing Of Hardmetals

    Euro PM2021 Congress Proceedings

  3. High-temperature precipitation design-of-experiments simulation in low-alloy cr–mo–ni hot forging steel

    Metals, Vol. 11, Núm. 7

  4. Mechanical Properties of WC-FeNiCoCr Based Hardmetals

    Euro PM2021 Congress Proceedings

  5. Reactive sintering of WC-Ni-Co-Cr-Ti-Al cemented carbides and precipitation of gamma prime in their metallic binder phases

    International Journal of Refractory Metals and Hard Materials, Vol. 95

2020

  1. An investigation into the effects of HIP after sintering of WC-ZrC-Co-Cr3C2 cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 87

  2. Effect of chromium and carbon contents on the sintering of WC-Fe-Ni-Co-Cr multicomponent alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 92