Publicaciones en las que colabora con José Ignacio Álvarez Galindo (48)

2024

  1. Air lime renders with microencapsulated phase change materials: Assessment of microstructural and thermal properties

    Construction and Building Materials, Vol. 452

  2. Increasing the Sustainability of the Stabilization/Solidification of Potentially Toxic Elements Contained in Tailings from an Active Mine Using a Modified Lime Mortar

    Sustainability (Switzerland) , Vol. 16, Núm. 6

  3. Study on the Interaction of Polymeric Chemical Additives with Phase Change Materials in Air Lime Renders

    Polymers, Vol. 16, Núm. 8

2023

  1. Development of Photocatalytic Coatings for Building Materials with Bi2O3-ZnO Nanoparticles

    Catalysts, Vol. 13, Núm. 11

  2. Enhancement of Latent Heat Storage Capacity of Lime Rendering Mortars

    RILEM Bookseries (Springer Science and Business Media B.V.), pp. 567-581

  3. Obtaining of Repair Lime Renders with Microencapsulated Phase Change Materials: Optimization of the Composition, Application, Mechanical and Microstructural Studies

    RILEM Bookseries (Springer Science and Business Media B.V.), pp. 582-598

2021

  1. Improvement of the depolluting and self-cleaning abilities of air lime mortars with dispersing admixtures

    Journal of Cleaner Production, Vol. 292

  2. Improving lime-based rendering mortars with admixtures

    Construction and Building Materials, Vol. 271

  3. Optimisation of mortar with Mg-Al-Hydrotalcite as sustainable management strategy lead waste

    Applied Clay Science, Vol. 212

  4. Oral Efficacy of a Diselenide Compound Loaded in Nanostructured Lipid Carriers in a Murine Model of Visceral Leishmaniasis

    ACS Infectious Diseases, Vol. 7, Núm. 12, pp. 3197-3209

2020

  1. Combination of polymeric superplasticizers, water repellents and pozzolanic agents to improve air lime-based grouts for historic masonry repair

    Polymers, Vol. 12, Núm. 4

  2. Development of Multifunctional Coatings for Protecting Stones and Lime Mortars of the Architectural Heritage

    International Journal of Architectural Heritage, Vol. 14, Núm. 7, pp. 1008-1029

2018

  1. Influence of two polymer-based superplasticizers (poly-naphthalene sulfonate, PNS, and lignosulfonate, LS) on compressive and flexural strength, freeze-thaw, and sulphate attack resistance of lime-metakaolin grouts

    Polymers, Vol. 10, Núm. 8

  2. Photocatalytically active coatings for cement and air lime mortars: Enhancement of the activity by incorporation of superplasticizers

    Construction and Building Materials, Vol. 162, pp. 628-648

2017

  1. Atmospheric NOx removal: Study of cement mortars with iron- and vanadium-doped TiO2 as visible light–sensitive photocatalysts

    Construction and Building Materials, Vol. 149, pp. 257-271

  2. The effect of TiO2 doped photocatalytic nano-additives on the hydration and microstructure of portland and high alumina cements

    Nanomaterials, Vol. 7, Núm. 10

2016

  1. Study of the early hydration of calcium aluminates in the presence of different metallic salts

    Cement and Concrete Research, Vol. 81, pp. 1-15

  2. Study on the effectiveness of PNS and LS superplasticizers in air lime-based mortars

    Cement and Concrete Research, Vol. 82, pp. 11-22

2015

  1. A safer disposal of hazardous phosphate coating sludge by formation of an amorphous calcium phosphate matrix

    Journal of Environmental Management, Vol. 159, pp. 288-300

  2. Photocatalytic NOx abatement by calcium aluminate cements modified with TiO2: Improved NO2 conversion

    Cement and Concrete Research, Vol. 70, pp. 67-76