Publicaciones (72) Publicaciones de Eduardo José Ayesa Iturrate

2024

  1. Process performance and precipitate quality of phosphorus recovery by struvite precipitation in a fluidized bed reactor using a MgO industrial by-product

    Journal of Environmental Chemical Engineering, Vol. 12, Núm. 3

2023

  1. Struvite precipitation in wastewater treatment plants anaerobic digestion supernatants using a magnesium oxide by-product

    Science of the Total Environment, Vol. 890

2021

  1. Corrigendum to A New Mass-Based Discretized Population Balance Model for Precipitation Processes: Application to Struvite Precipitation Water Research 155 (2019) 26-41 (Water Research (2019) 155 (26–41), (S0043135419301034), (10.1016/j.watres.2019.01.047))

    Water Research

  2. Inclusion of shear rate effects in the kinetics of a discretized population balance model: Application to struvite precipitation

    Water Research, Vol. 200

2019

  1. A New Mass-Based Discretized Population Balance Model for Precipitation Processes: Application to Struvite Precipitation

    Water Research, Vol. 155, pp. 26-41

  2. Model-based opti mization of phosphorus management strategies in Sur WWTP, Madrid

    Water Research, Vol. 153, pp. 39-52

  3. Optimización del diseño y la operación de EDAR utilizando herramientas de simulación integral

    XXXV Jornadas Técnicas de AEAS

2018

  1. Modelización y simulación

    Ecuaciones y cálculos para el tratamiento de aguas (Paraninfo), pp. 187-195

  2. Validation of a multi-phase plant-wide model for the description of the aeration process in a WWTP

    Water Research, Vol. 129, pp. 305-318

2017

  1. Diagnosis and optimization of WWTPs using the PWM library: Full-scale experiences

    Water Science and Technology, Vol. 75, Núm. 3, pp. 518-529

  2. Exploración por simulación de eliminación biológica de P y recuperación de estruvita en EDAR urbanas

    XXXIV Jornadas Técnicas de AEAS

  3. Model-based comparative assessment of innovative processes

    Innovative Wastewater Treatment & Resource Recovery Technologies: Impacts on Energy, Economy and Environment, pp. 599-621

  4. Model-based methodology for the design of optimal control strategies in MBR plants

    Water Science and Technology, Vol. 75, Núm. 11, pp. 2546-2553

  5. Quantitative assessment of energy and resource recovery in wastewater treatment plants based on plant-wide simulations

    Water Research, Vol. 118, pp. 272-288

  6. Sensitivity analysis and calibration with bayesian inference of a mass-based discretized population balance model for struvite precipitation

    Lecture Notes in Civil Engineering (Springer), pp. 614-621

2015

  1. A new general methodology for incorporating physico-chemical transformations into multi-phase wastewater treatment process models

    Water Research, Vol. 74, pp. 239-256

2014

  1. Estimación del potencial de ahorro en los sistemas de aireación de las EDAR mediante la medición de la transferencia de oxígeno

    Tecnoaqua, Núm. 9, pp. 64-72

  2. New systematic methodology for incorporating dynamic heat transfer modelling in multi-phase biochemical reactors

    Water Research, Vol. 60, pp. 141-155

2013

  1. Add control: Plant virtualization for control solutions in WWTP

    Water Science and Technology, Vol. 68, Núm. 2, pp. 296-302

  2. Development of a decision tree for the integrated operation of nutrient removal MBRs based on simulation studies and expert knowledge

    Chemical Engineering Journal, Vol. 217, pp. 174-184