Publications en collaboration avec des chercheurs de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (15)

2020

  1. Effect of hip cooling rate and post-hip heat treatments on IN718 microstructure and mechanical properties

    Euro PM 2018 Congress and Exhibition

  2. Selective laser melting of ti-6al-4v: The impact of post-processing on the tensile, fatigue and biological properties for medical implant applications

    Materials, Vol. 13, Núm. 12, pp. 1-16

  3. The influence of hip heat-treatments on the tensile and HCF properties of Ti6Al4V

    Euro PM 2018 Congress and Exhibition

2019

  1. Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel

    Acta Materialia, Vol. 172, pp. 6-17

  2. Reduction of the oxygen content on IN718 gas-atomised powder for HIP applications

    Euro PM 2019 Congress and Exhibition

  3. The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V

    Acta Materialia, Vol. 165, pp. 520-527

2016

  1. Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718

    World PM 2016 Congress and Exhibition

2015

  1. Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition

2011

  1. Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides

    Corrosion Science, Vol. 53, Núm. 9, pp. 2754-2760

  2. Consolidation of (Ti,Mo)(C,N)-Ni cermets by glass encapsulated hot isostatic pressing

    Materials Science and Engineering A, Vol. 528, Núm. 13-14, pp. 4453-4461

  3. TiCN-WC-Cr-Ni based cermets produced by liquid phase sintering for hot rolling applications

    Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011

2010

  1. Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 4, pp. 516-522

2009

  1. Effect of Ni powder characteristics on the consolidation of ultrafine TiMoCN cermets by means of SPS and HIP technologies

    Materials Science and Engineering A, Vol. 500, Núm. 1-2, pp. 225-232

  2. Effect of the binder phase content and decarburization phenomena on the oxidation and wear resistance of WC-CoNiCr materials

    Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2009

2008

  1. Consolidation of ultrafine cemented titanium carbonitrides with high aluminum and molybdenum contents

    Proceedings of the 7th International Conference on Tungsten, Refractory and Hardmaterials