Publicaciones (20) Publicaciones de Ernesto Urionabarrenechea Gomez

2024

  1. On the feasibility to obtain CuCrZr alloys with outstanding thermal and mechanical properties by additive manufacturing

    Journal of Nuclear Materials, Vol. 601

2023

  1. Additive Manufacturing of Fe-Mn-Si-Based Shape Memory Alloys: State of the Art, Challenges and Opportunities

    Materials, Vol. 16, Núm. 24

  2. Advances In The Numerical Modelling Of The Close-Coupled Gas Atomisation Process: Optimal Coupling Between Primary And Secondary Atomisation Stages

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  3. Development Of Nickel Aluminium Bronzes By Powder Metallurgy For Marine Applications

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  4. Short-Loop Recycling Of Nd-Fe-B Scrap By Gas Atomization

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

2022

  1. Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

    Materials, Vol. 15, Núm. 18

  2. Efficient Modelling Of Primary And Secondary Atomisation In Close-Coupled Gas Atomisers

    World PM 2022 Congress Proceedings

  3. Multiphase model to predict particle size distributions in close-coupled gas atomization

    International Journal of Multiphase Flow, Vol. 154

  4. Simulation and validation of the gas flow in close-coupled gas atomisation process: Influence of the inlet gas pressure and the throat width of the supersonic gas nozzle

    Powder Technology, Vol. 407

2021

  1. Experimental study of the influence of operational and geometric variables on the powders produced by close-coupled gas atomisation

    Materials and Design, Vol. 199

  2. Numerical simulation and experimental testing of different close-coupled gas atomiser designs

    Euro PM2021 Congress Proceedings

  3. Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition

    RSC Advances, Vol. 11, Núm. 30, pp. 18493-18499

2020

  1. Injection of ceramic nanoparticles during gas atomization to produce metal matrix nanocomposite powders

    Euro PM 2018 Congress and Exhibition

  2. SIMULATION AND TESTING OF TWO DIFFERENT CONCEPTS OF ANTI-SATELLITE SYSTEM FOR THE GAS ATOMISATION PROCESS

    Proceedings - Euro PM2020 Congress and Exhibition

2019

  1. Influence of some geometric features of the atomisation chamber on particle agglomeration and satellite formation during gas atomisation

    Euro PM 2019 Congress and Exhibition

2017

  1. Influence of the atomiser geometry on the gas flow in close-coupled gas atomisation

    Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition

2015

  1. Optimization of a gas atomisation process for the production of fine powders

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition

2014

  1. Influence of key operational and geometrical variables on the particle size during close-coupled gas atomisation

    Euro PM 2014 Congress and Exhibition, Proceedings

2013

  1. Experimental study and simulation of the gas flow in the atomisation chamber during close-coupled gas atomisation

    International Powder Metallurgy Congress and Exhibition, Euro PM 2013

  2. Influence of sintering cycle and chemical composition on the amount of martensite obtained after cooling of PM nickel steels

    International Powder Metallurgy Congress and Exhibition, Euro PM 2013