Publikationen, an denen er mitarbeitet Fernando Arizti Urquijo (18)

2021

  1. A New Technique to Obtain an Equivalent Indirect Hysteresis Loop from the Distortion of the Voltage Measured in the Excitation Coil

    IEEE Transactions on Instrumentation and Measurement, Vol. 70

  2. Analysis of the voltage drop across the excitation coil for magnetic characterization of skin passed steel samples

    Measurement: Journal of the International Measurement Confederation, Vol. 174

  3. Improvement in the equivalent indirect hysteresis cycles obtained from the distortion of the voltage measured in the excitation coil

    IEEE Transactions on Instrumentation and Measurement, Vol. 70

2020

  1. Ultrasensitive transverse magneto-optical Kerr effect measurements using an effective ellipsometric detection scheme

    Journal of Physics D: Applied Physics, Vol. 53, Núm. 20

2018

  1. Quantitative estimation of nonmonotonic residual stress depth-profiles using an extended Kypris-Jiles model of the magnetic Barkhausen noise spectrum

    Journal of Applied Physics, Vol. 123, Núm. 3

2017

  1. Induction Hardened Layer Characterization and Grinding Burn Detection by Magnetic Barkhausen Noise Analysis

    Journal of Nondestructive Evaluation, Vol. 36, Núm. 2

  2. Ultrasensitive transverse magneto-optical Kerr effect measurements by means of effective polarization change detection

    Journal of Physics D: Applied Physics, Vol. 50, Núm. 23

2013

  1. Quantitative magneto-optical characterization of diffusive reflected light from rough steel samples

    Journal of Applied Physics, Vol. 113, Núm. 15

2010

  1. Magnetic barkhausen noise for characterization of recovery and recrystallization

    IEEE Transactions on Magnetics, Vol. 46, Núm. 2, pp. 513-516

2009

  1. A completely configurable digital system for simultaneous measurements of hysteresis loops and Barkhausen noise

    IEEE Transactions on Instrumentation and Measurement

2008

  1. A completely configurable digital system for simultaneous measurement of hysteresis loops and Barkhausen noise

    Conference Record - IEEE Instrumentation and Measurement Technology Conference

  2. Efficacy of magnetic inductive parameters for annealing characterization of cold rolled low carbon steel

    IEEE Transactions on Magnetics, Vol. 44, Núm. 11 PART 2, pp. 3839-3842

2007

  1. Nondestructive characterization of recovery and recrystallization in cold rolled low carbon steel by magnetic hysteresis loops

    Journal of Magnetism and Magnetic Materials, Vol. 316, Núm. 2 SPEC. ISS.

  2. Sensing in coin discriminators

    Proceedings of the 2007 IEEE Sensors Applications Symposium, SAS

2005

  1. Application of coercive field measurements to the evaluation of recovery and recrystallization in cold rolled Interstitial Free (IF) steel

    Materials Science Forum

2004

  1. Determination of the recovery kinetics during the annealing of cold rolled low carbon steels

    Materials Science Forum

  2. Recovery during annealing in a cold rolled low carbon steel. Part I: Kinetics and microstructural characterization

    Acta Materialia, Vol. 52, Núm. 12, pp. 3657-3664

  3. Recovery during annealing in a cold rolled low carbon steel. Part II: Modelling the kinetics

    Acta Materialia, Vol. 52, Núm. 12, pp. 3665-3670