Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (23)

2021

  1. A New Technique to Obtain an Equivalent Indirect Hysteresis Loop from the Distortion of the Voltage Measured in the Excitation Coil

    IEEE Transactions on Instrumentation and Measurement, Vol. 70

  2. Analysis of the voltage drop across the excitation coil for magnetic characterization of skin passed steel samples

    Measurement: Journal of the International Measurement Confederation, Vol. 174

  3. Insertion layer magnetism detection and analysis using transverse magneto-optical Kerr effect (T-MOKE) ellipsometry

    Journal of Physics D: Applied Physics, Vol. 54, Núm. 43

2020

  1. A regressor-based hysteresis formulation for the magnetic characterisation of low carbon steels

    Physica B: Condensed Matter, Vol. 581

  2. Ultrasensitive transverse magneto-optical Kerr effect measurements using an effective ellipsometric detection scheme

    Journal of Physics D: Applied Physics, Vol. 53, Núm. 20

2018

  1. Product uniformity control - A research collaboration of european steel industries to non-destructive evaluation of microstructure and mechanical properties

    Studies in Applied Electromagnetics and Mechanics

  2. Quantitative estimation of nonmonotonic residual stress depth-profiles using an extended Kypris-Jiles model of the magnetic Barkhausen noise spectrum

    Journal of Applied Physics, Vol. 123, Núm. 3

  3. Use of meta-modelling for identification and interpolation of parametric hysteresis models applied to the characterization of carbon steels

    Physica B: Condensed Matter, Vol. 549, pp. 122-126

2017

  1. Assessing the recovery and recrystallization kinetics of cold rolled microalloyed steel through coercive field measurements

    Materials Science and Engineering A, Vol. 691, pp. 42-50

  2. Ultrasensitive transverse magneto-optical Kerr effect measurements by means of effective polarization change detection

    Journal of Physics D: Applied Physics, Vol. 50, Núm. 23

2014

  1. Characterisation of in-depth stress state by magnetic Barkhausen noise on machined steel acquiring different frequency bands

    Advanced Materials Research

2013

  1. Quantitative magneto-optical characterization of diffusive reflected light from rough steel samples

    Journal of Applied Physics, Vol. 113, Núm. 15

2010

  1. Magnetic barkhausen noise for characterization of recovery and recrystallization

    IEEE Transactions on Magnetics, Vol. 46, Núm. 2, pp. 513-516

  2. Sensitiveness of magnetic inductive parameters for the characterization of recovery and recrystallization in cold-rolled low-carbon steel

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

2009

  1. A completely configurable digital system for simultaneous measurements of hysteresis loops and Barkhausen noise

    IEEE Transactions on Instrumentation and Measurement

2008

  1. A completely configurable digital system for simultaneous measurement of hysteresis loops and Barkhausen noise

    Conference Record - IEEE Instrumentation and Measurement Technology Conference

  2. Effect of stored energy and recovery on the overall recrystallization kinetics of a cold rolled low carbon steel

    Materials Science and Engineering A, Vol. 485, Núm. 1-2, pp. 200-209

  3. Efficacy of magnetic inductive parameters for annealing characterization of cold rolled low carbon steel

    IEEE Transactions on Magnetics, Vol. 44, Núm. 11 PART 2, pp. 3839-3842

2007

  1. Nondestructive characterization of recovery and recrystallization in cold rolled low carbon steel by magnetic hysteresis loops

    Journal of Magnetism and Magnetic Materials, Vol. 316, Núm. 2 SPEC. ISS.

2005

  1. Application of coercive field measurements to the evaluation of recovery and recrystallization in cold rolled Interstitial Free (IF) steel

    Materials Science Forum