Publicaciones (32) Publicaciones de Ane Martínez de Guereñu Elorza

2023

  1. Grinding Burn Detection via Magnetic Barkhausen Noise Analysis Independently of Induction Hardened Depth

    Materials, Vol. 16, Núm. 5

2022

  1. Interpretation of the magnetic susceptibility behaviour of soft carbon steels based on the scaling theory of second order phase transitions for systems with supercritical disorder

    Journal of Magnetism and Magnetic Materials, Vol. 555

  2. Sensitivity and reproducibility of transverse magneto-optical Kerr effect (T-MOKE) ellipsometry

    Journal of Physics D: Applied Physics, Vol. 55, Núm. 43

2021

  1. A New Technique to Obtain an Equivalent Indirect Hysteresis Loop from the Distortion of the Voltage Measured in the Excitation Coil

    IEEE Transactions on Instrumentation and Measurement, Vol. 70

  2. Analysis of the voltage drop across the excitation coil for magnetic characterization of skin passed steel samples

    Measurement: Journal of the International Measurement Confederation, Vol. 174

  3. Improvement in the equivalent indirect hysteresis cycles obtained from the distortion of the voltage measured in the excitation coil

    IEEE Transactions on Instrumentation and Measurement, Vol. 70

  4. Insertion layer magnetism detection and analysis using transverse magneto-optical Kerr effect (T-MOKE) ellipsometry

    Journal of Physics D: Applied Physics, Vol. 54, Núm. 43

2020

  1. A regressor-based hysteresis formulation for the magnetic characterisation of low carbon steels

    Physica B: Condensed Matter, Vol. 581

  2. Ultrasensitive transverse magneto-optical Kerr effect measurements using an effective ellipsometric detection scheme

    Journal of Physics D: Applied Physics, Vol. 53, Núm. 20

2018

  1. Product uniformity control - A research collaboration of european steel industries to non-destructive evaluation of microstructure and mechanical properties

    Studies in Applied Electromagnetics and Mechanics

  2. Quantitative estimation of nonmonotonic residual stress depth-profiles using an extended Kypris-Jiles model of the magnetic Barkhausen noise spectrum

    Journal of Applied Physics, Vol. 123, Núm. 3

  3. Use of meta-modelling for identification and interpolation of parametric hysteresis models applied to the characterization of carbon steels

    Physica B: Condensed Matter, Vol. 549, pp. 122-126

2017

  1. Assessing the recovery and recrystallization kinetics of cold rolled microalloyed steel through coercive field measurements

    Materials Science and Engineering A, Vol. 691, pp. 42-50

  2. Induction Hardened Layer Characterization and Grinding Burn Detection by Magnetic Barkhausen Noise Analysis

    Journal of Nondestructive Evaluation, Vol. 36, Núm. 2

  3. Ultrasensitive transverse magneto-optical Kerr effect measurements by means of effective polarization change detection

    Journal of Physics D: Applied Physics, Vol. 50, Núm. 23

2014

  1. Characterisation of in-depth stress state by magnetic Barkhausen noise on machined steel acquiring different frequency bands

    Advanced Materials Research

2013

  1. Quantitative magneto-optical characterization of diffusive reflected light from rough steel samples

    Journal of Applied Physics, Vol. 113, Núm. 15

2011

  1. Analysis of the frequency band to derive the magnetic Barkhausen noise signal using a configurable and computer-aided system for the simultaneous measurements of magnetic hysteresis loops and Barkhausen noise

    9TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING

2010

  1. ASSESSMENT OF MICROSTRUCTURE AND TEXTURE EVOLUTION DURING RECOVERY AND RECRYSTALLIZATION BY MAGNETIC METHODS

    10TH EUROPEAN CONFERENCE ON NON-DESTRUCTIVE TESTING 2010 (ECNDT), VOLS 1-5

  2. Magnetic barkhausen noise for characterization of recovery and recrystallization

    IEEE Transactions on Magnetics, Vol. 46, Núm. 2, pp. 513-516