Publications by the researcher in collaboration with Mikel Gómez Aranzadi (28)

2025

  1. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

    Optics and Laser Technology, Vol. 180

2024

  1. Fabrication of Thin-Wall Structures with a Femtosecond Laser and Stainless Steel Powder †

    Micromachines, Vol. 15, Núm. 4

  2. Single-Step Fabrication of Highly Tunable Blazed Gratings Using Triangular-Shaped Femtosecond Laser Pulses

    Micromachines, Vol. 15, Núm. 6

2023

  1. Fabrication of Thin-wall Structures with Femtosecond Laser and Stainless Steel Powder

    2023 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2023 - Proceedings

  2. Study of the processing conditions for stainless steel additive manufacturing using femtosecond laser

    Optics and Laser Technology, Vol. 161

2021

  1. LIPSS manufacturing with regularity control through laser wavefront curvature

    Surfaces and Interfaces, Vol. 25

2020

  1. Biomimetic hierarchical micro/nano texturing of TiAlV alloys by femtosecond laser processing for the control of cell adhesion and migration

    Physical Review Materials, Vol. 4, Núm. 5

  2. Femtosecond laser fabrication of LIPSS-based waveplates on metallic surfaces

    Applied Surface Science, Vol. 520

  3. Femtosecond laser fabrication of monolithic double volume phase-gratings in glass

    Optics Express, Vol. 28, Núm. 20, pp. 29055-29063

2019

  1. Fabrication of tuned LIPSS-based metallic polarization gratings

    Optics InfoBase Conference Papers

  2. Fabrication of tuned lipss-based metallic polarization gratings

    2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019

  3. Femtosecond laser fabrication of volume-phase gratings in CdSxSe1-x-doped borosilicate glass at a low repetition rate

    Applied Optics, Vol. 58, Núm. 16, pp. 4220-4226

2018

  1. Erratum to: Tailoring diamond’s optical properties via direct femtosecond laser nanostructuring (Scientific Reports, (2018), 8, 1, (14262), 10.1038/s41598-018-32520-0)

    Scientific Reports

  2. Tailoring diamond’s optical properties via direct femtosecond laser nanostructuring

    Scientific Reports, Vol. 8, Núm. 1

2017

  1. Enhancement of surface area and wettability properties of boron doped diamond by femtosecond laser-induced periodic surface structuring

    Optical Materials Express, Vol. 7, Núm. 9, pp. 3389-3396

  2. Mask-less lithography of diamond films using shaped ultrafast UV pulses

    2017 CONFERENCE ON LASERS AND ELECTRO-OPTICS EUROPE & EUROPEAN QUANTUM ELECTRONICS CONFERENCE (CLEO/EUROPE-EQEC)

  3. Photonic structures in diamond based on femtosecond UV laser induced periodic surface structuring (LIPSS)

    Optics Express, Vol. 25, Núm. 13, pp. 15330-15335

  4. Temperature simulation at ZnO surface processed by laser interference lithography

    Proceedings of SPIE - The International Society for Optical Engineering

  5. Volume Polarization gratings inscribed in glass with femtosecond lasers

    2017 CONFERENCE ON LASERS AND ELECTRO-OPTICS EUROPE & EUROPEAN QUANTUM ELECTRONICS CONFERENCE (CLEO/EUROPE-EQEC)

  6. Volume polarization gratings inscribed in glass with femtosecond lasers

    Optics InfoBase Conference Papers