Miguel
Martínez-Iturralde Maiza
Investigador Principal
Ibon
Elosegui Simón
Profesor Titular
Publicaciones en las que colabora con Ibon Elosegui Simón (22)
2023
-
Novel composition of Nd-Fe-B gas atomized powder to produce compression bonded magnets
Advanced Powder Technology, Vol. 34, Núm. 11
2022
-
Review of High Power and High Voltage Electric Motors for Single-Aisle Regional Aircraft
IEEE Access, Vol. 10, pp. 112989-113004
2021
-
Eliminating rare earth permanent magnets on low-speed high-torque machines: A performance and cost comparison of synchronous reluctance machines, ferrite permanent magnet-synchronous reluctance machines and permanent magnet synchronous machines for a direct-drive elevator system
IET Electric Power Applications, Vol. 15, Núm. 3, pp. 370-378
2018
-
Node mapping criterion for highly saturated interior PMSMs using magnetic reluctance network
Energies, Vol. 11, Núm. 9
-
Optimal pole number and winding designs for low speed-high torque synchronous reluctance machines
Energies, Vol. 11, Núm. 1
-
Wafter design for totally enclosed electric machines
Applied Thermal Engineering, Vol. 129, pp. 93-105
2017
-
Design criteria for water cooled systems of induction machines
Applied Thermal Engineering, Vol. 114, pp. 1018-1028
2016
-
A simple model for fault analysis of multiphase PMSM drives
2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016
-
Analysis and comparison of algebraic approaches for highly saturated Surface PMSM
2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2016
2015
-
Analysis of relevant aspects of thermal and hydraulic modeling of electric machines. Application in an Open Self Ventilated machine
Applied Thermal Engineering, Vol. 75, pp. 277-288
-
Analytical Calculation of the Slot Leakage Inductance in Fractional-Slot Concentrated-Winding Machines
IEEE Transactions on Industrial Electronics, Vol. 62, Núm. 5, pp. 2742-2752
-
Coupled thermal and hydraulic algebraic models for an open self-ventilated induction machine
IET Electric Power Applications, Vol. 9, Núm. 8, pp. 513-522
-
Fault-tolerant permanent magnet synchronous machine - phase, pole and slot number selection criterion based on inductance calculation
IET Electric Power Applications, Vol. 9, Núm. 2, pp. 138-149
-
Manufacturing of isotropic bonded NdFeB Magnets from Gas atomised powders
Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition
2014
-
Analytical sizing methodology for inductive power transfer systems
2014 IEEE 15th Workshop on Control and Modeling for Power Electronics, COMPEL 2014
2013
-
Coupled electromagnetic and thermal design of miniaturized permanent magnet linear motors for sliding door applications
International Review of Electrical Engineering, Vol. 8, Núm. 5, pp. 1416-1426
2011
-
Analytical calculation of the flux distribution and demagnetization in spoke interior permanent-magnet machines with non-magnetic shaft
International Review of Electrical Engineering, Vol. 6, Núm. 3, pp. 1228-1238
2008
-
Fast sizing and simulation of multipole radial flux permanent magnet synchronous machines
SPEEDAM 2008 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion
-
Flat magnets in surface-mounted permanent magnet machines
Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)
-
Flat magnets in surface-mounted permanent magnet machines: Influence and design
SPEEDAM 2008 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion