Universidad del País Vasco/Euskal Herriko Unibertsitatea-ko ikertzaileekin lankidetzan egindako argitalpenak (17)

2024

  1. Development of anisotropic Nd-Fe-B powder from isotropic gas atomized powder

    Powder Technology, Vol. 431

  2. Extremely low coercivity of powder Co-rich amorphous alloy obtained by gas atomisation

    Journal of Alloys and Compounds, Vol. 990

  3. Study of a New Novel HVOAF Coating Based on a New Multicomponent Al80Mg10Si5Cu5 Alloy

    Coatings, Vol. 14, Núm. 9

  4. Study of an iron phosphate soft magnetic composite and its stability at high temperatures

    Ceramics International, Vol. 50, Núm. 13, pp. 22468-22478

2023

  1. Additive Manufacturing of Fe-Mn-Si-Based Shape Memory Alloys: State of the Art, Challenges and Opportunities

    Materials, Vol. 16, Núm. 24

  2. Improvement Of The Magnetic Properties Of Powder Cores By Optimizing The Volume Fraction Of Amorphous Material

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  3. Novel composition of Nd-Fe-B gas atomized powder to produce compression bonded magnets

    Advanced Powder Technology, Vol. 34, Núm. 11

2022

  1. Characterization Of Soft Magnetic Composites With Ceramic Coating Produced By Hot Press

    World PM 2022 Congress Proceedings

  2. Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

    Materials, Vol. 15, Núm. 18

  3. Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 187

  4. Internal friction associated with ε martensite in shape memory steels produced by casting route and through additive manufacturing: Influence of thermal cycling on the martensitic transformation

    Journal of Alloys and Compounds, Vol. 919

2021

  1. Effect of neodymium content and niobium addition on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 172

  2. Novel predictive methodology of amorphisation of gas-atomised Fe-Si-B alloy powders

    Journal of Non-Crystalline Solids, Vol. 574

2020

  1. Coercivity and magnetic anisotropy of (Fe0.76 si0.09 b0.10 p0.05)97.5 nb2.0 cu0.5 amorphous and nanocrystalline alloy produced by gas atomization process

    Nanomaterials, Vol. 10, Núm. 5

  2. Novel Fe-based amorphous and nanocrystalline powder cores for high-frequency power conversion

    Journal of Magnetism and Magnetic Materials, Vol. 501

  3. Resin bonded magnetocaloric plates with a thickness of 0.3 mm produced from gas atomized powder

    Proceedings - Euro PM2020 Congress and Exhibition

2019

  1. Structural and magnetic properties of amorphous and nanocrystalline Fe–Si–B–P–Nb–Cu alloys produced by gas atomization

    Journal of Alloys and Compounds, Vol. 810