Publicacions (33) Publicacions de Nerea Burgos García

2024

  1. Crack-free wear resistance coating on carbon steel obtained by directed energy deposition of Fe-base partial amorphous powders

    Results in Materials, Vol. 21

  2. Development of anisotropic Nd-Fe-B powder from isotropic gas atomized powder

    Powder Technology, Vol. 431

  3. Extremely low coercivity of powder Co-rich amorphous alloy obtained by gas atomisation

    Journal of Alloys and Compounds, Vol. 990

  4. In situ synthesis of titanium alloy powders reinforced with nanoparticles for powder bed fusion: A step towards safer and more sustainable manufacturing

    Additive Manufacturing, Vol. 82

  5. Study of an iron phosphate soft magnetic composite and its stability at high temperatures

    Ceramics International, Vol. 50, Núm. 13, pp. 22468-22478

2023

  1. Additive Manufacturing of Fe-Mn-Si-Based Shape Memory Alloys: State of the Art, Challenges and Opportunities

    Materials, Vol. 16, Núm. 24

  2. Effect of temperature on particle shape, size, and polycrystallinity of Nd-Fe-B powders obtained by hydrogen decrepitation

    Journal of Materials Research and Technology, Vol. 24, pp. 1454-1467

  3. Improvement Of The Magnetic Properties Of Powder Cores By Optimizing The Volume Fraction Of Amorphous Material

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  4. Novel composition of Nd-Fe-B gas atomized powder to produce compression bonded magnets

    Advanced Powder Technology, Vol. 34, Núm. 11

  5. Short-Loop Recycling Of Nd-Fe-B Scrap By Gas Atomization

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  6. Study Of The Grain Growth Of Nd-Fe-B Atomized Powders With Different Nd Contents And The Addition Of Nb And Ga As Doping Metals

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

2022

  1. Characterization Of Soft Magnetic Composites With Ceramic Coating Produced By Hot Press

    World PM 2022 Congress Proceedings

  2. Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

    Materials, Vol. 15, Núm. 18

  3. Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 187

  4. Internal friction associated with ε martensite in shape memory steels produced by casting route and through additive manufacturing: Influence of thermal cycling on the martensitic transformation

    Journal of Alloys and Compounds, Vol. 919

2021

  1. Effect of neodymium content and niobium addition on grain growth of Nd-Fe-B powders produced by gas atomization

    Materials Characterization, Vol. 172

  2. Fundamental study of the hydrogen decrepitation process of Nd-Fe-B alloys

    Euro PM2021 Congress Proceedings

  3. Novel predictive methodology of amorphisation of gas-atomised Fe-Si-B alloy powders

    Journal of Non-Crystalline Solids, Vol. 574

2020

  1. Coercivity and magnetic anisotropy of (Fe0.76 si0.09 b0.10 p0.05)97.5 nb2.0 cu0.5 amorphous and nanocrystalline alloy produced by gas atomization process

    Nanomaterials, Vol. 10, Núm. 5

  2. Novel Fe-based amorphous and nanocrystalline powder cores for high-frequency power conversion

    Journal of Magnetism and Magnetic Materials, Vol. 501