Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (30)

2019

  1. Substructure development and damage initiation in a carbide-free bainitic steel upon tensile test

    Metals, Vol. 9, Núm. 12

2017

  1. Problems related to slow strain rate test performance and specimen characterization in austenitic corrosion resistant alloy tubes

    NACE - International Corrosion Conference Series

  2. Tensile Work Hardening Modeling of Precipitation Strengthened Nb-Microalloyed Steels

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 48, Núm. 6, pp. 2943-2948

2015

  1. Grain boundary engineering in a thermo-mechanically processed Nb-stabilized austenitic stainless steel

    IOP Conference Series: Materials Science and Engineering

2014

  1. Microstructure-mechanical properties relationships for complex microstructures in high strength steels

    Materials Science Forum

2013

  1. Generalization of the existing relations between microstructure and yield stress from ferrite-pearlite to high strength steels

    Materials Science and Engineering A, Vol. 561, pp. 40-51

2012

  1. Precipitation of Nb in ferrite after austenite conditioning. Part I: Microstructural characterization

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 43, Núm. 12, pp. 4553-4570

  2. Precipitation of Nb in ferrite after austenite conditioning. Part II: Strengthening contribution in high-strength low-alloy (HSLA) steels

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 43, Núm. 12, pp. 4571-4586

2009

  1. EBSD characterization of a hot worked 304 austenitic stainless steel under strain reversal

    Journal of Microscopy, Vol. 235, Núm. 1, pp. 36-49

  2. On measurement of retained austenite in multiphase TRIP steels results of blind round robin test involving six different techniques

    Materials Science and Technology, Vol. 25, Núm. 5, pp. 567-574

  3. Precipitation strengthening produced by the formation in ferrite of Nb carbides

    Metallurgia Italiana, Vol. 101, Núm. 6, pp. 41-47

  4. Role of vanadium microalloying in austenite conditioning and pearlite microstructure in thermomechanically processed eutectoid steels

    ISIJ International, Vol. 49, Núm. 10, pp. 1615-1623

2008

  1. Precipitation strengthening produced by the formation in ferrite of Nb carbides

    3rd International Conference on Thermomechanical Processing of Steels, TMP 2008

2007

  1. Deformation banding and the role of transition bands between α-fibre components on recrystallization in low carbon steels studied by EBSD

    Materials Science Forum

  2. Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel

    Journal of Microscopy, Vol. 228, Núm. 3, pp. 373-383

2005

  1. Effect of the strain reversal on grain boundary character and substructure development on a hot worked austenitic stainless steel

    Materials Science Forum

  2. Influence of vanadium microaddition on the microstructure and mechanical properties of high strength large diameter wire-rods

    Materials Science Forum

  3. Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel

    Materials Science and Engineering A, Vol. 394, Núm. 1-2, pp. 445-454

2004

  1. Cold rolled microstructure and its evolution during recovery and first recrystallisation stages in low carbon steels

    Materials Science Forum

  2. Effect of the strain reversal on the microstructure and the recrystallization kinetics of the austenite

    Materials Science Forum