Publicaciones en colaboración con investigadores/as de Universidad de Salamanca (19)

2024

  1. Discrete Element Method-Based Hybrid Compartment Model of a Rotary Dryer for Fertilizer Production

    Industrial and Engineering Chemistry Research, Vol. 63, Núm. 19, pp. 8713-8728

2023

  1. Economic and Environmental Comparison of Integrated Processes to Produce Chloromethanes from Brine Waste and CO2

    ACS Sustainable Chemistry and Engineering, Vol. 11, Núm. 31, pp. 11502-11515

2021

  1. Numerical study of airflow regimes and instabilities produced by the swirl generation chamber in counter-current spray dryers

    Chemical Engineering Research and Design, Vol. 176, pp. 89-101

  2. Single droplet drying of detergents: Experimentation and modelling

    Particuology, Vol. 58, pp. 35-47

  3. The Use of Optimized Restitution Coefficients to Improve Residence Time Prediction in Computational Fluid Dynamics-Discrete Parcel Method Models for Counter-Current Spray Dryers

    Industrial and Engineering Chemistry Research, Vol. 60, Núm. 47, pp. 17091-17109

  4. Water as a resource: Renewable energies and technologies for brine revalorization

    Sustainable Design for Renewable Processes: Principles and Case Studies (Elsevier), pp. 517-549

2020

  1. Production of H2and Methanol via Dark Fermentation: A Process Optimization Study

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 38, pp. 16720-16729

  2. Systematic Generation of a Robust Compartment Model for Counter-current Spray Dryers

    Computer Aided Chemical Engineering (Elsevier B.V.), pp. 259-264

2019

  1. Computational Fluid Dynamics and Multiphysics

    Introduction to Software for Chemical Engineers: Second Edition (Taylor and Francis), pp. 253-332

  2. Computational fluid dynamics and multiphysics

    Introduction to Software for Chemical Engineers, Second Editionw (CRC Press), pp. 253-332

  3. Optimal production of syngas via super-dry reforming. Analysis for natural gas and biogas under different CO2 taxes

    Chemical Engineering Research and Design, Vol. 148, pp. 375-392

  4. Optimization of Biogas to Syngas via Combined Super-Dry and Tri-Reforming. Analysis of Fischer-Tropsch Fuels Production

    Computer Aided Chemical Engineering (Elsevier B.V.), pp. 193-198

2018

  1. Computational Fluid Dynamics (CFD) Modeling of Swirling Flows in Industrial Counter-Current Spray-Drying Towers under Fouling Conditions †

    Industrial and Engineering Chemistry Research, Vol. 57, Núm. 35, pp. 11988-12002

  2. Optimization for biogas to chemicals via tri-reforming. Analysis of Fischer-Tropsch fuels from biogas

    Energy Conversion and Management, Vol. 174, pp. 998-1013

2017

  1. Bio-waste selection and blending for the optimal production of power and fuels via anaerobic digestion

    Chemical Engineering Research and Design, Vol. 121, pp. 163-172

  2. Methodology for biomass blending for the production of power and fuels from biogas

    Computer Aided Chemical Engineering (Elsevier B.V.), pp. 667-672

  3. Optimal Integrated Plant for Production of Biodiesel from Waste

    ACS Sustainable Chemistry and Engineering, Vol. 5, Núm. 8, pp. 6756-6767

2016

  1. Optimal Process Operation for Biogas Reforming to Methanol: Effects of Dry Reforming and Biogas Composition

    Industrial and Engineering Chemistry Research, Vol. 55, Núm. 23, pp. 6677-6685

  2. Solar energy as source for power and chemicals

    Alternative Energy Sources and Technologies: Process Design and Operation (Springer International Publishing), pp. 181-206