Publicaciones en las que colabora con Javier Gil Sevillano (16)

2018

  1. A comparison of the structure and mechanical properties of commercially pure tungsten rolled plates for the target of the European spallation source

    International Journal of Refractory Metals and Hard Materials, Vol. 70, pp. 45-55

  2. Elasto-plastic behaviour of a columnar structure of nanocrystalline iron with sharp 〈011〉 fibre texture

    Materialia, Vol. 2, pp. 218-230

2016

  1. Atomistic simulation of the elongation response of a <011> oriented columnar nano-grain bcc Fe polycrystalline sample

    Meccanica, Vol. 51, Núm. 2, pp. 401-413

2011

  1. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

2010

  1. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

  2. Plastic deformation by conservative shear-coupled migration of tilt boundaries with intergranular nano-cracks or precipitates

    Philosophical Magazine

  3. Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions

    Materials Research Society Symposium Proceedings

2009

  1. Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper

    Physica Status Solidi (C) Current Topics in Solid State Physics

2008

  1. Mode II loading behaviour of intergranular cracks lying on symmetrical tilt boundaries in Cu

    Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008

2007

  1. Molecular dynamics simulation of crack tip blunting in opposing directions along a symmetrical tilt grain boundary of copper bicrystal

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 30, Núm. 11, pp. 1008-1015

2006

  1. Atomistic simulation of tensile strength and toughness of cracked Cu nanowires

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622

2005

  1. Calculation of nano-crystalline copper toughness using the embedded atom method

    11th International Conference on Fracture 2005, ICF11

  2. Simulation of the microstructural evolution during liquid phase sintering using a geometrical Monte Carlo model

    Modelling and Simulation in Materials Science and Engineering, Vol. 13, Núm. 7, pp. 1057-1070

2004

  1. Ductilization of nanocrystalline materials for structural applications

    Scripta Materialia, Vol. 51, Núm. 8 SPEC. ISS., pp. 795-800

  2. Hall-Petch behaviour induced by plastic strain gradients

    Materials Science and Engineering A, Vol. 365, Núm. 1-2, pp. 186-190

2002

  1. A mesoscopic plasticity model accounting for spatial fluctuations of plastic strains, internal stresses and dislocation densities

    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, Vol. 93, Núm. 7, pp. 681-688