Publicaciones en las que colabora con Javier Gil Sevillano (71)

2024

  1. A microstructure-based constitutive model for eutectoid steels

    Acta Materialia, Vol. 263

2018

  1. A comparison of the structure and mechanical properties of commercially pure tungsten rolled plates for the target of the European spallation source

    International Journal of Refractory Metals and Hard Materials, Vol. 70, pp. 45-55

2017

  1. New mesoscopic constitutive model for deformation of pearlitic steels up to moderate strains

    IOP Conference Series: Materials Science and Engineering

2015

  1. Microcompression tests of single-crystalline and ultrafine grain Bi2Te3 thermoelectric material

    Journal of Materials Research, Vol. 30, Núm. 17, pp. 2593-2604

2014

  1. Deformazio plastiko bortitzen bitartez prosezaturiko material termoelektrikoen karakterizazio mekaniko eta termoelektrikoa

    II Materialen Zientzia eta Teknologia Kongresua

  2. Mechanical properties of PBTE processed by HPT (high-pressure torsion)

    Materials Science and Technology Conference and Exhibition 2013, MS and T 2013

  3. Numerical analysis of the indentation size effect using a strain gradient crystal plasticity model

    Computational Materials Science, Vol. 82, pp. 314-319

  4. Reverse vs. Effective strain in the ring-rolling of superalloy 718

    8th International Symposium on Superalloy 718 and Derivatives 2014

  5. Structure and texture of twin roll cast strips of Zn-Cu-Ti zinc alloy

    Materials Science and Technology (United Kingdom)

2013

  1. Nanoporous gold periodical linear patterns obtained by laser interference thermal treatment

    Thin Solid Films, Vol. 548, pp. 69-74

  2. Propiedades mecánicas del telururo de bismuto (Bi2Te3) procesado mediante torsión bajo alta presión (HPT)

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 52, Núm. 3, pp. 137-142

2012

  1. Assessment of elastic anisotropy and incipient plasticity in Fe 3C by nanoindentation

    Journal of Materials Research, Vol. 27, Núm. 1, pp. 45-52

2011

  1. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

  2. Towards a reliable procedure for the measurement of elastic modulus in instrumented indentation

    Philosophical Magazine, Vol. 91, Núm. 7-9, pp. 1400-1408

2010

  1. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

  2. Hall-Petch relationship of a TWIP steel

    Key Engineering Materials

  3. Plastic deformation by conservative shear-coupled migration of tilt boundaries with intergranular nano-cracks or precipitates

    Philosophical Magazine

  4. Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions

    Materials Research Society Symposium Proceedings

2009

  1. Micromechanical model of 3D cross-ply copper matrix composite reinforced with SiC fibres

    Engineering Failure Analysis, Vol. 16, Núm. 8, pp. 2559-2566

  2. Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper

    Physica Status Solidi (C) Current Topics in Solid State Physics