Publications en collaboration avec des chercheurs de Centro de Investigación en Materiales Avanzados (15)

2020

  1. Towards improving low-temperature degradation of zirconia/alumina ceramics via in-situ formation of an Al2O3 functional surface layer through sintering in the presence of graphite powder

    Journal of Alloys and Compounds, Vol. 818

2017

  1. Effect of low-content of carbon nanotubes on the fracture toughness and hardness of carbon nanotube reinforced alumina prepared by sinter, HIP and sinter + HIP routes

    Materials Research Express, Vol. 4, Núm. 8

2016

  1. Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

    Ceramics International, Vol. 42, Núm. 14, pp. 16417-16423

  2. SWCNTs versus MWCNTs as Reinforcement Agents in Zirconia-and Alumina-based Nanocomposites: Which One to Use

    Advanced Ceramics (Wiley Blackwell), pp. 261-297

  3. Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: Is it justifiable the effort to reinforce them?

    Ceramics International, Vol. 42, Núm. 1, pp. 2054-2062

2015

  1. Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: A novel way to delay hydrothermal degradation

    Ceramics International, Vol. 41, Núm. 3, pp. 4569-4580

2012

  1. Hard and tough carbon nanotube-reinforced zirconia-toughened alumina composites prepared by spark plasma sintering

    Carbon, Vol. 50, Núm. 2, pp. 706-717

  2. High temperature oxidation of silicon nitride based ceramics: A review

    Silicon Nitride: Synthesis, Properties and Applications (Nova Science Publishers, Inc.), pp. 1-31

  3. X-ray diffraction evidence of a phase transformation in zirconia by the presence of graphite and carbon nanotubes in zirconia toughened alumina composites

    International Journal of Refractory Metals and Hard Materials, Vol. 35, pp. 315-318

2011

  1. A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites

    Carbon, Vol. 49, Núm. 5, pp. 1599-1607

2010

  1. Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: Microstructure and fracture toughness

    International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 3, pp. 399-406

2009

  1. Fracture toughness of an α-Al2O3 ceramic for joint prostheses under sinter and sinter-HIP conditions

    International Journal of Refractory Metals and Hard Materials, Vol. 27, Núm. 4, pp. 722-728

  2. Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressureless sintered at different temperatures: Improvement in mechanical properties for use in total hip arthroplasty (THA)

    International Journal of Refractory Metals and Hard Materials, Vol. 27, Núm. 5, pp. 900-906

  3. Using high-purity MgO nanopowder as a stabilizer in two different particle size monoclinic ZrO2: Its influence on the fracture toughness

    Materials Chemistry and Physics, Vol. 114, Núm. 1, pp. 407-414

2007

  1. Elucidating of the microstructure of ZrO2 ceramics with additions of 1200 °C heat treated ultrafine MgO powders: Aging at 1420 °C

    Materials Chemistry and Physics, Vol. 106, Núm. 1, pp. 45-53