Publicaciones en colaboración con investigadores/as de University of Birmingham (14)

2024

  1. Development of anisotropic Nd-Fe-B powder from isotropic gas atomized powder

    Powder Technology, Vol. 431

2020

  1. Effect of hip cooling rate and post-hip heat treatments on IN718 microstructure and mechanical properties

    Euro PM 2018 Congress and Exhibition

  2. Laser powder bed fusion of a Zr-alloy: Tensile properties and biocompatibility

    Materials Letters, Vol. 259

  3. Selective laser melting of ti-6al-4v: The impact of post-processing on the tensile, fatigue and biological properties for medical implant applications

    Materials, Vol. 13, Núm. 12, pp. 1-16

  4. The influence of hip heat-treatments on the tensile and HCF properties of Ti6Al4V

    Euro PM 2018 Congress and Exhibition

2019

  1. Comprehensive numerical modelling of the hot isostatic pressing of Ti-6Al-4V powder: From filling to consolidation

    Advanced Powder Technology, Vol. 30, Núm. 11, pp. 2451-2463

  2. Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel

    Acta Materialia, Vol. 172, pp. 6-17

  3. Influence of powder characteristics on the microstructure and mechanical properties of HIPped CM247LC Ni superalloy

    Materials and Design, Vol. 174

  4. The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V

    Acta Materialia, Vol. 165, pp. 520-527

2016

  1. Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718

    World PM 2016 Congress and Exhibition

  2. Process optimisation of selective laser melting using energy density model for nickel based superalloys

    Materials Science and Technology (United Kingdom), Vol. 32, Núm. 7, pp. 657-661

2015

  1. Influence of heat treatment on the microstructure and tensile properties of HIPped CM247LC

    Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015

  2. Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition

2002

  1. Sinter-HIP of α-alumina powders with sub-micron grain sizes

    Journal of the European Ceramic Society, Vol. 22, Núm. 11, pp. 1801-1809